DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 19th July 2009
knasbas knasbas is offline
Port Guard
 
Join Date: May 2008
Posts: 25
Thanked 0 Times in 0 Posts
Default no space left on drive while installing?

After choosing which sets i want to use the installer starts to download them.
Halfway through comp45 i get different errors and i mean always different.
This last time i get this: (i will post more errors as i get them)

id 0 on /mnt: write failed, file system is full
tar: Failed write to file ./insert_random_file: No space left on device

Another time
mnt/usr: bad dir ino 2 at offset 0: mangled entry
panic: bad dir
syncing disks... 864 854 719 372 done

I have no clue but im guessing its the satacontroller on the mobo so when i try to do dmesg i get this
dmesg: sysctl: KERN_MSGBUFSIZE: Device not configured


The hardware is
ABit NF7-S v2.0 with latest bios
Samsung SATA 400gb
Athlon Barton 2500
Intel PRO 1000/GT
Nvidia Geforce 256DDR
1gb DDR ram
1 IDE Lite-on CDrom
Ive removed all the extra disks+satacontroller when i ran into problems to minimize where the errors can come from...
Reply With Quote
  #2   (View Single Post)  
Old 19th July 2009
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,710
Thanked 214 Times in 189 Posts
Default

If your failure(s) are due to running out of disk space, then your chosen partitions are too small.

If you'd like further help, post configuration information that will help us help you:
  1. Boot the ramdisk kernel you use for install, once more.
  2. At the "Install, Update, or Shell?" prompt, select the shell.
  3. Issue the following command, substituting the drive-of-interest, such as wd0, sd0, or wd1, for the <device>:

    # disklabel -p m <device>
  4. Post the resulting partition table here. We don't need the content from above the table, just the table itself.
  5. In addition, posting a dmesg(8) might be helpful. FAQ 4.15 may aid you in acquiring your dmesg, as well as the output from disklabel(8).

Last edited by jggimi; 20th July 2009 at 12:26 PM.
Reply With Quote
  #3   (View Single Post)  
Old 20th July 2009
knasbas knasbas is offline
Port Guard
 
Join Date: May 2008
Posts: 25
Thanked 0 Times in 0 Posts
Default

Solved it but thanks for help anyway. Was some sort of irq conflict that made the satacontroller go crazy. A hint was searching google with "abit nf7-s booting from sata drive" and getting ALOT on hits...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
No ram left? knasbas OpenBSD General 11 26th September 2009 11:31 PM
Installing packages from USB drive (OpenBSD 4.5) divadgnol67 OpenBSD Packages and Ports 26 30th July 2009 04:21 PM
Problem Installing From External DVD Drive jimnms OpenBSD Installation and Upgrading 8 16th July 2009 07:12 PM
left handed mouse techmarks FreeBSD General 2 2nd October 2008 10:17 PM
Missing hard drive space. df and du can't agree tsan FreeBSD General 2 30th July 2008 09:08 PM


All times are GMT. The time now is 06:21 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick