Free BSD Release 8.0 not recognizing CD/DVD and usb install media
I am trying to install Free BSD release 8.0 on my Dell XPS Studio laptop along with already existing Windows partition. (150GB for Win Vista, 30GB for win backup and 130 GB for Free BSD). To do trial I first installed it on Sun virtual Box in Windows where it installed without any complaints. However when I tried clean install it on the desired partition it refuses to recognize both my CD/DVD drive and usb disk during "Select installation media:" menu in sysinstall. Please do help me out as I need it to study for an course in upcoming semester.
In text the problem it shows is:
"No CD/DVD devices found! Please check that your system's configuration is correct and that the CD/DVD drive is of a supported type. For more information, consult the hardware guide in the Doc menu."
Its amazing because:
* My installation media (release 8 CD) is already in CD/DVD drive.
* I have tried both CD and DVD release so no chance of corrupted media.
* How then the sysinstall menu came in first place if it didn't recognize my DVD or DVD drive
* It installs pretty well in both virtual environments by Sun virtual box and VMware in Windows.
I am also writing my total specifications from dell site. Please do aid me in solving this problem as I am making this daring transition from Ubuntu to Free BSD (mainly for its academic importance and clean coding style). I lay high hope on this forum.
Dell Studio XPS 13
Intel® Core™ 2 Duo P8700 (3MB cache/2.53GHz/1066Mhz FSB)
Genuine Windows® 7 Home Premium, 64bit, English
Specifications - Operating System
Genuine Windows® Vista Home Premium, 64bit, English
Specifications - Operating System
Edge-to-Edge 13.3" HD WXGA LCD with 2.0 Megapixel Camera
Specifications - LCD Panel
Internal Optical Drive
8X Slot Load CD/DVD Burner (Dual Layer DVD+/-R Drive)
Specifications - Internal Optical Drive
4GB4 Dual Channel DDR3 SDRAM3 at 1067MHz (2 Dimms)
Specifications - MEMORY
320GB5 7200 RPM6 SATA Hard Drive
Specifications - Hard Drive
NVIDIA® GeForce® 9500M - 256MB
Specifications - Video Card
High Definition Audio 2.0
Specifications - SOUND CARD
Wireless Networking Cards
Dell Wireless 1520 802.11n Half Mini-Card
Specifications - Wireless Networking Cards
Installation on laptops usually is problematic because of the customized hardware used.
You could try the other FreeBSD production release http://www.freebsd.org/releases/7.2R/announce.html
If that works then it would be easier to debug the 8.0 non-install issue
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
I got the same problem with the 8.0 dvd from two differents laptop:
- toshiba satellite 1800: cd/dvddrive: unable to find the dvd from sysinstall (I booted from the cdrom drive and I started the install from). I wil try to boot from the floppy and switch to the cdrom drive to get the packages.
- hp compaq mini 110c-1100ca (netbook): booted from the usb drive, sysinstall starts but cannot find the drive to extract the packages (base, usr, ...). So I boot from the 8.0 img on a usb pen drive and I did the installation
I would use *-memstick-*.img image and install from USB pendrive.
religions, worst damnation of mankind
"If 386BSD had been available when I started on Linux, Linux would probably never had happened." Linus Torvalds
Linux is not UNIX! Face it! It is not an insult. It is fact: GNU is a recursive acronym for “GNU's Not UNIX”.
vermaden's: links resources deviantart spreadbsd
I have used FreeBSD 6 and FreeBSD 7 CD's on *many* different computers (Both desktop and laptop) at work, and I've never experienced such an issue.
I haven't used FreeBSD 8 a lot yet ...
If sysinstall works, you can also fetch the distribution sets from other sources and circumvent the CD entirely, you can use FTP or HTTP to fetch them from the FreeBSD servers, but you can also mount an NFS filesystem, or mount an USB drive and get the sets from that ...
UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things.
I start with the img and I told sysinstall to fetch the cdrom drive (usb). I cannot use the network (new netbook compaq mini 110c 1100ca, the wifi is broadcom (no driver) and the ether card is a atheros R8132).
Not certain, but I think if you can drop to a shell or
something, in sysinstall, and load the 3rd,fourth of four
access will be restored to the usb drive.
You may however, be missing any of the
to have devices appear for the usb drive before
its files can be seen.
So you may need four or so .ko's for the usb install.
as well as the three above.
would go into /boot/loader.conf if the fix works
I know the method for "escape to loader prompt" but
am unusure of how to do it in sysintall.
Drop to a shell and find those .ko files??
using /LOOKAT/ with /var/db/pkg files and portmaster/aliases/pipes/find/grep to meteorically speedup port upgrades/installs...
As I recall, in sysinstall you can go to the Options page and click rescan devices.
This worked fine for me when I tried to install FBSD 8.0 on an old laptop (with a broken cd-rom drive) using a usb dvd-drive
|Thread||Thread Starter||Forum||Replies||Last Post|
|hald(1) and nautilus(1) does not automount media||vermaden||FreeBSD Ports and Packages||3||2nd November 2009 06:17 PM|
|Popcorn Hour Media Box||DraconianTimes||Off-Topic||1||9th April 2009 06:18 PM|
|freeBSD not recognizing IDE HDD||amclay||FreeBSD Installation and Upgrading||8||19th January 2009 08:19 AM|
|Media error... are there any way to help this?||Sunnz||OpenBSD General||0||5th May 2008 06:45 AM|
|install Free BSD to boot off a floppy||aromes||FreeBSD Installation and Upgrading||4||5th May 2008 04:08 AM|