DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD General

FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 11th August 2010
GFORGX GFORGX is offline
New User
 
Join Date: Aug 2010
Posts: 2
Thanked 0 Times in 0 Posts
Default FreeBSD 8.0-RELEASE and VLANs

Hi,

I have FreeBSD 8.0-RELEASE installed on two servers and the network card drivers being used are 're' and 'em'.

This problem occurs for both of them.

I have a switch port configured as trunk for 3 VLANs on a L3 switch, and 3 VLAN interfaces set up on FreeBSD server.

The problem is I don't see *any* traffic with tcpdump at all while having switch port configured as trunk and VLANs set up on FreeBSD.

I don't experience this problem with Linux server attached to the same or identically configured switch port with the same network card and the same VIDs configured.

Actually, I can't post "ifconfig" output, because of non-working VLANs I have only physical access to this server ATM, but I can give any information if it's needed

Thanks in advance for any ideas.
Reply With Quote
  #2   (View Single Post)  
Old 11th August 2010
GFORGX GFORGX is offline
New User
 
Join Date: Aug 2010
Posts: 2
Thanked 0 Times in 0 Posts
Default

Tested just the same on my laptop

Quote:
root@laptop> ifconfig /home/gforgx
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING ,VLAN_HWCSUM,TSO4,WOL_MAGIC>
ether 00:1f:29:a0:8a:5f
inet6 fe80::21f:29ff:fea0:8a5f%em0 prefixlen 64 scopeid 0x1
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=100<PROMISC> metric 0 mtu 33200
em0.8: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3<RXCSUM,TXCSUM>
ether 00:1f:29:a0:8a:5f
inet6 fe80::21f:29ff:fea0:8a5f%em0.8 prefixlen 64 scopeid 0x4
inet 10.1.2.161 netmask 0xfff00000 broadcast 10.15.255.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 8 parent interface: em0
root@laptop> tcpdump -nn /home/gforgx
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on em0.8, link-type EN10MB (Ethernet), capture size 96 bytes
03:21:46.218710 ARP, Request who-has 10.0.10.1 tell 10.1.2.161, length 28
03:21:49.597597 ARP, Request who-has 10.0.0.1 tell 10.1.2.161, length 28
^C
2 packets captured
2 packets received by filter
0 packets dropped by kernel
ARP requests above are requests generated by my laptop while pinging 2 hosts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FreeBSD FreeBSD 8.1-RELEASE Available J65nko News 0 24th July 2010 11:05 PM
FreeBSD Release Cycle for FreeBSD 8.1-RELEASE J65nko News 1 17th May 2010 05:53 PM
vlans and pfstat zomo OpenBSD General 4 9th July 2009 09:19 PM
FreeBSD 6.2-RELEASE > 7.0-RELEASE Upgrade Marci FreeBSD Installation and Upgrading 2 23rd July 2008 02:10 PM
Configuring VLANs under FreeBSD Popof FreeBSD General 5 13th May 2008 04:08 PM


All times are GMT. The time now is 10:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick