DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 9th October 2010
marcolino's Avatar
marcolino marcolino is offline
Real Name: Mark
Custom Title Maker
 
Join Date: May 2008
Location: At the Mountains of Madness
Posts: 114
Thanked 0 Times in 0 Posts
Default pciide0:0:0 not ready

Hi all,

I'm trying to install OpenBSD 4.7 on a PC that has an Abit NF-7S motherboard. The NF-7S has an onboard Silicon Industries SiI 3112A SATA controller. The issue is that the hard drive doesn't seem to initialize. Here is the output:
Code:
entry point at 0x200120

Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.7 (RAMDISK_CD) #353: Wed Mar 17 21:02:53 MDT 2010
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.84 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 1073250304 (1023MB)
avail mem = 1033007104 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/03, BIOS32 rev. 0 @ 0xfb3f0, SMBIOS rev. 2.2 @ 0xf0800 (37 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 12/01/2003
bios0: http://www.abit.com.tw/ NF7-S/NF7 (nVidia-nForce2)
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11 12 14 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x4800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa3
"NVIDIA nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa3: irq 11, version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa3: irq 15, version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa3: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address 00:50:80:fb:17:17
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
"NVIDIA nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
"NVIDIA nForce2 AC97" rev 0xa1 at pci0 dev 6 function 0 not configured
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
pciide0 at pci1 dev 11 function 0 "CMD Technology SiI3112 SATA" rev 0x02: DM
pciide0: using irq 15 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y200M0>
wd0: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HP, DVD Writer 1070r, RH22> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using BIOS timings, Ultra-DMA mode 5
pciide1 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 ignored (disabled)
pciide1: channel 1 ignored (disabled)
"NVIDIA nForce2 FireWire" rev 0xa3 at pci0 dev 13 function 0 not configured
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce FX 5900" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
biomask ffed netmask ffed ttymask ffff
rd0: fixed, 3800 blocks
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
softraid0 at root
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
pciide0 channel 0: reset failed for drive 0
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
pciide0 channel 0: reset failed for drive 0
wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00
There seem to be several items not configured, but I'm not sure if they are relevant. I'm also not sure where to go from here. Any ideas?
__________________
That's nothing a couple o' pints wouldn't fix.
Reply With Quote
  #2   (View Single Post)  
Old 10th October 2010
rocket357's Avatar
rocket357 rocket357 is offline
Real Name: Jonathon
Wannabe OpenBSD porter
 
Join Date: Jun 2010
Location: 127.0.0.1
Posts: 332
Thanked 9 Times in 9 Posts
Default

Google didn't turn up much in terms of OpenBSD + that hardware, but it turned up quite a bit about the BIOS being buggy:

Quote:
The trick was to not only enable the SATA controller, but also to enable the BOOT SATA RAID ROM option in the bios. My incorrect assumption was that you only activate the SATA RAID ROM option if you want to do maintenance on your RAID array, and since I only had a single HDD, I wasn't needing it. However, enabling the SATA RAID ROM option is what makes the SATA drives available for booting, too! You don't need to enter the RAID config (it says to hit Ctrl-S if you want it). Just enable SATA RAID ROM, and now windows boots just fine from the SATA HDD. No driver updates or bios updates were necessary.
Taken from http://pressf1.pcworld.co.nz/archive...p/t-44633.html

Could that be the problem?

Last edited by rocket357; 10th October 2010 at 01:57 AM.
Reply With Quote
  #3   (View Single Post)  
Old 10th October 2010
marcolino's Avatar
marcolino marcolino is offline
Real Name: Mark
Custom Title Maker
 
Join Date: May 2008
Location: At the Mountains of Madness
Posts: 114
Thanked 0 Times in 0 Posts
Default

That option is enabled in BIOS. I neglected to mention that this had been a Win2k machine for several years until I purchased an iMac in May. I only now had a chance to try to install OpenBSD (or anything for that matter). I also didn't find much with respect to OpenBSD on that hardware, other than that support for the SiI 3112 was added long ago. Thank you for the info.
__________________
That's nothing a couple o' pints wouldn't fix.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
BSD Magazine 2010/04 ready to download vermaden News 0 8th April 2010 07:49 AM
FreeBSD ZFS considered production ready in FreeBSD 8 aleunix News 1 24th November 2009 04:11 PM


All times are GMT. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick