DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 29th June 2016
frcc frcc is offline
Don't Worry Be Happy!
 
Join Date: Jul 2011
Location: hot,dry,dusty,rainy,windy,straight winds, tornado,puts the fear of God in you-Texas
Posts: 87
Default mounting usb

Hi Folks

--- Current dmesg ----
Code:
OpenBSD 5.9 (GENERIC) #1561: Fri Feb 26 01:22:37 MST 2016
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
real mem  = 534728704 (509MB)
avail mem = 511959040 (488MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 11/08/04, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (59 entries)
bios0: vendor Dell Computer Corporation version "A02" date 11/08/2004
bios0: Dell Computer Corporation Dimension 3000
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) PCI1(S5) KBD_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpicpu0 at acpi0: C1(@1 halt!)
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0: apic 1 int 16
inteldrm0: 1920x1080
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
rl0 at pci1 dev 0 function 0 "Realtek 8139" rev 0x10: apic 1 int 21, address 00:e0:4f:06:66:69
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci1 dev 1 function 0 "Realtek 8139" rev 0x10: apic 1 int 22, address 00:e0:4d:06:3d:f2
rlphy1 at rl1 phy 0: RTL internal PHY
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int 20, address 00:13:20:55:1a:3d
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0802N>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PHILIPS, DVD+-RW DVD8701, 5D24> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 1 int 17, ICH5 AC97
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 8 configuration 1 interface 0 "PNY Technologies USB 2.0 FD" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <PNY, USB 2.0 FD, 2.00> SCSI2 0/direct removable serial.154b00e1000000000639
sd0: 15283MB, 512 bytes/sector, 31299584 sectors, readonly
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Dell product 0x3010" rev 2.00/2.20 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (418d8ab2da87f8a5.a) swap on wd0b dump on wd0b
Code:
# Disklabel sd0
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: USB 2.0 FD      
duid: 0000000000000000
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 254
sectors/cylinder: 16002
cylinders: 1955
total sectors: 31299584
boundstart: 0
boundend: 31299584
drivedata: 0 
16 partitions:
#                size           offset  fstype [fsize bsize  cpg]
  c:         31299584                0  unused                   
  i:         31299552               32   MSDOS
Code:
# fdisk sd0
Disk: sd0	geometry: 1955/254/63 [31299584 Sectors]
Offset: 0	Signature: 0xAA55
            Starting         Ending         LBA Info:
 #: id      C   H   S -      C   H   S [       start:        size ]
-------------------------------------------------------------------------------
 0: 0C      0   0  33 -   1955 248  50 [          32:    31299552 ] Win95 FAT32L
 1: 00      0   0   0 -      0   0   0 [           0:           0 ] unused      
 2: 00      0   0   0 -      0   0   0 [           0:           0 ] unused      
 3: 00      0   0   0 -      0   0   0 [           0:           0 ] unused
I won't bore you with the numerous permations of attempting to mount this usb drive .BUT.

They usually result with
permission errors
configuration errors
block errors
etc

I have created a /mnt/pen directory and have attempted to mount there.
Plugging the usb stick in does result in the system recognizing it.

usb stick is PNY 16 gig.

Can someone shed some light on this as I am confused....

Last edited by ocicat; 29th June 2016 at 04:47 AM. Reason: Please use [code] & [/code] tags when posting command output.
Reply With Quote
  #2   (View Single Post)  
Old 29th June 2016
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,367
Default

It's hidden in the attachment information produced by your kernel.
Code:
sd0 at scsibus2 targ 1 lun 0: <PNY, USB 2.0 FD, 2.00> SCSI2 0/direct removable serial.154b00e1000000000639
sd0: 15283MB, 512 bytes/sector, 31299584 sectors, readonly
Reply With Quote
  #3   (View Single Post)  
Old 29th June 2016
frcc frcc is offline
Don't Worry Be Happy!
 
Join Date: Jul 2011
Location: hot,dry,dusty,rainy,windy,straight winds, tornado,puts the fear of God in you-Texas
Posts: 87
Default

Yes I noted that in dmesg, also have received numerous error messages
that annotates that.

Since it is "new" from the store,,,,,,,how does one write at least once into the
device?

Change permissions ??
Try different mounting statement variations ??
Try different mounting loations ??

I have used the standard #mount /dev/sd0i/ /mnt/pen command with
variations as well as attempting to mount as Msdos stick

I have not been able to mount the device with multiple permatations of
the mount command to /mnt/pen without some sort of error.
Reply With Quote
  #4   (View Single Post)  
Old 29th June 2016
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 5,367
Default

The drive electronics are reporting the device is configured read only. If the device does not have a physical switch to cause it to become writable, return it to the store and request a replacement or refund.
Reply With Quote
  #5   (View Single Post)  
Old 29th June 2016
frcc frcc is offline
Don't Worry Be Happy!
 
Join Date: Jul 2011
Location: hot,dry,dusty,rainy,windy,straight winds, tornado,puts the fear of God in you-Texas
Posts: 87
Default

Thankyou Mr Jggimi !
Kinda suspected that could be the case as I have many hp sticks that work well and are mounted and umounted in a straightforward fashion.


Last edited by frcc; 30th June 2016 at 01:34 AM. Reason: clarity
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
mounting external XFS HDD rativid OpenBSD General 5 3rd September 2010 02:31 PM
Mounting an FS with no MBR/disklabel Carpetsmoker FreeBSD General 2 10th December 2009 01:22 PM
smb mounting question zerhacke FreeBSD General 5 3rd January 2009 01:47 AM
Mounting sniper007 FreeBSD General 7 2nd July 2008 06:50 AM
mounting UFS hirohitosan Other BSD and UNIX/UNIX-like 2 27th June 2008 02:40 PM


All times are GMT. The time now is 01:02 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick