OpenVPN tunnel problem on OBSD 4.9
Hello dear experts,
I have OpenVPN-2.2.1 configured on two OpenBSD 4.9
I am able to ping: client -> server and all networks behind
I am not able to ping: server -> client at all
I already checked my FW, you can see the configuration below.
Ping works with pf and OpenVPN stopped. (OK)
Ping does not work with pf enabled and openVPN stopped. (OK)
Ping works in only one direction with pf and OpenVPN enabled (NOT OK)
And a small question: why is there one tunnel from the client's point of view (10.0.1.6 -> 10.0.1.5), but from the server's point of view - there is a different tunnel (10.0.1.1 -> 10.0.1.2)? What am I missing here? In my understanding, there should be only one tunnel (for example 10.0.1.0/30, with .0 being the net, .1 server, .2 the client and .3 the broadcast).
Please help me figure that out... i have a feeling it is something really simple, but I dont know where to go from here...
Uploaded are screenshots with my setup (it wont allow me to post the links, so please remove the leading zero and copy-paste the addresses. Thanks! ):
The simple topology:
Interface IPs + routing tables:
Ping from client to server succeeds:
Ping from server to client fails:
I am also uploading the OpenVPN logs (verb=6). The successful ping (client->server, 5 packets) was initiated exactly at 21:29:30 and the 'unsuccessful' ping (server->client, 6 packets) was initiated at 21:29:45
OpenVPN Server-side log:
link #1 (w/ 10 sec timer): 0http://www.yourfilelink.com/get.php?fid=714560
link #2 (local file share server): 0http://dox.bg/files/dw?a=5535558a24
OpenVPN Client-side log:
link #1 (w/ 10 sec timer): 0http://www.yourfilelink.com/get.php?fid=714563
link #2 (local file share server): 0http://dox.bg/files/dw?a=2b17aa9164
I hope I havent missed any important information... one thing worth noting is the "openvpn: writing to routing socket: Protocol not supported" during OpenVPN startup on the server...
Thank you VERY much in advance for your help, it is greatly appreciated!
It appears to me that you have UDP traffic flowing between client and server, from looking at the OpenVPN logs you provided. I don't think your problem is OpenBSD; it appears to be an OpenVPN configuration issue.
I have not played with OpenVPN in six or seven years; all I can remember is that the UDP or TCP tunnels are easy to set up, but that provisioning OpenVPN properly to actually work with them is much more difficult.
Unfortunately, since I'm not an OpenVPN user and my knowledge of it has faded, all I can do is recommend that you focus on the server and client configurations as the likely root cause.
Thanks for your response, jggimi. You are goddamn right about the setup - easy, with several commands - but troubleshooting to actually make it work is a lot more complex...
Last screenshot (ping from server to client) is confusing me a lot - packets just dissappear somewhere between tun0 and vic0! Firewalls are 100% identical on server and client...
I forgot to mention that a ping sweep (10.0.1.1 to 10.0.1.10) from the client succeeds only on 10.0.1.1, and from the server - only on 10.0.1.6, i.e. they can only ping their address as shown in ifconfig tun0 (4th screenshot)
I hope somebody sheds some light in here
Looking through the forum, I found several OpenVPN threads which may be of interest to you:
http://www.daemonforums.org/showthread.php?t=5653 -- regarding the use of layer2 vs. layer3 tun(4) devices, ARP packets being ignored, and a script to circumvent the problem.
http://www.daemonforums.org/showthread.php?t=3205 -- it includes an older, but working client configuration from forum member There0 which may provide some insight.
http://www.daemonforums.org/showthread.php?t=5625 -- a long thread discussing routing, PF, tun devices, and more. From February of this year.
Okay, I resolved my problem, here is what it:
On the VPN server, there should be a file "[ccd directory]/[client_OU]". Both are specified in the "vars" file. In my case i had to create a file "/etc/openvpn/ccd/192.168.2.200". This file should contain the "iroute" command to the remote network. In my case it was "iroute 192.168.0.0 255.255.255.0"
Thanks everyone (jggimi )for your help.
|Thread||Thread Starter||Forum||Replies||Last Post|
|openvpn on openbsd problem....||michaelk||OpenBSD Security||8||9th February 2011 04:49 AM|
|OBSD 4.6 Installed - Problem building Kernel for -current||IronForge||OpenBSD Installation and Upgrading||11||10th November 2009 09:34 PM|
|Tunnel to Proxy||PatrickBaer||General software and network||2||11th August 2008 03:32 PM|
|Multiple IPSEC Tunnel problem||RMSZaphod||FreeBSD Security||1||28th June 2008 10:08 AM|
|OpenVPN - Problem with connections||MME||General software and network||2||26th May 2008 06:42 PM|