DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Installation and Upgrading

OpenBSD Installation and Upgrading Installing and upgrading OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 26th February 2013
shep shep is offline
ISO Quartermaster
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 592
Thanked 9 Times in 9 Posts
Default Updating Bootloader

On an older laptop that was running current my screen started going blank after an update. The keyboard would also lock. Initially I thought the laptop video had finally died but I could still get into the bios. I tried Debian and it still worked.

I then recalled seeing something on the mailing lists about new boot code causing a problem - so I did a new install that worked. The boot loader version had incremented from 3.17 to 3.19.

I have two other machines running current and was wondering if there was a way to update the boot loader only? I will backup before trying. In the past the second current machine was used as a test machine. If the update worked I would synch my personal files with ftp (haven't gotten around to learning/setting up rsynch) and then update the main system.

To the question: Is it possible to update the boot code only?

Last edited by shep; 26th February 2013 at 10:44 PM. Reason: grammer
Reply With Quote
  #2   (View Single Post)  
Old 27th February 2013
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,686
Thanked 214 Times in 189 Posts
Default

Assuming you're booting amd64 or i386, the procedure would be:
  1. Backup your root directory. Have alternate boot media capability in the event of finger fumbles.
  2. Extract /usr/mdec files from the latest snapshot's base53.tgz fileset, and install in your own /usr/mdec, replacing the files there.
  3. Copy the newer second stage bootloader /usr/mdec/boot to your root directory.
  4. Install the newer first stage bootloader /usr/mdec/biosboot using installboot(8). If you've never used it before, you point to the second stage bootloader and the first, and your boot drive (sd0, wd1, etc.). Use the man page for guidance.
Example:

# /usr/mdec/installboot -v /boot /usr/mdec/biosboot sd0

Last edited by jggimi; 27th February 2013 at 01:21 AM. Reason: typo in the installboot command.
Reply With Quote
  #3   (View Single Post)  
Old 27th February 2013
shep shep is offline
ISO Quartermaster
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 592
Thanked 9 Times in 9 Posts
Default

@jggimi

Thanks

I'll try it on the test machine first and if successful synch it to my primary computer. The tackle the primary computer.

If I don't mess up this should save alot of time and bandwidth.

Addendum: The instructions worked well although the files in my /usr/mdec directory were upto date. I still went ahead downloaded base53.tgz and extracted the mdec files . I "diff"'d the existing /usr/mdec files with the extracted files and they were identical. I ran installboot on the test machine for the experience and ended up with OpenBSD/amd boot v 3.23 which is the boot version my main computer is using.

Thanks again

Last edited by shep; 27th February 2013 at 08:41 PM. Reason: Report Success
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
which bootloader does NetBSD use roelof NetBSD General 2 10th July 2012 05:41 PM
GRUB bootloader finally reaches version 2.00 J65nko News 2 1st July 2012 09:59 PM
patching or updating ? dennky OpenBSD Installation and Upgrading 12 14th January 2010 07:17 PM
Updating FreeBSD carpman FreeBSD Installation and Upgrading 6 26th October 2008 11:49 AM
URGENT HELP, BOOTLOADER ISSUE tad1214 FreeBSD General 4 23rd August 2008 04:34 PM


All times are GMT. The time now is 06:23 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick