DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD General

NetBSD General Other questions regarding NetBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 18th July 2013
tavrion tavrion is offline
Port Guard
 
Join Date: Jul 2013
Posts: 14
Thanked 0 Times in 0 Posts
Default Keyboard dead - sometimes, but always in pairs

Sometimes, when logging in, the keyboard is just dead. Somewhere during the boot sequence, all three lights on the keyboard light up and all is well. Other times, there are no lights and I am forced to hard reset, and it always happens for a second time immediately after the first incident. Then, third time lucky, it works. I usually have this issue after restarting from another OS or a X11 crash.

It is just weird that I ALWAYS have to reset twice before my keyboard works again. I have swopped keyboards - same issue. I am wondering if anyone else has experienced this issue?

-amd64 - NetBSD 6.1 - Haswell i5-4430.
Reply With Quote
  #2   (View Single Post)  
Old 18th July 2013
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,888
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by tavrion View Post
-amd64 - NetBSD 6.1 - Haswell i5-4430.
Please post the complete output of dmesg(8). This the kernel's understanding of the hardware landscape. At this point, we have no idea whether this keyboard is attached via a 9-bin DIN connector, USB, wireless, etc. We also don't know anything about the manufacturer or model of the keyboard itself. There may be other questions readers may have, & because dmesg(8) output lists everything, you will be helping others help you.
Reply With Quote
  #3   (View Single Post)  
Old 18th July 2013
tavrion tavrion is offline
Port Guard
 
Join Date: Jul 2013
Posts: 14
Thanked 0 Times in 0 Posts
Default

whoops, sorry.

Code:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1 (GENERIC)
total memory = 8071 MB
avail memory = 7821 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Gigabyte Technology Co., Ltd. B85M-HD3 (To be filled by O.E.M.)
mainbus0 (root)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-320)
ACPI Error: Null physical address for ACPI table [(null)] (20110623/tbutils-440)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
PTMD (INT3394) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0c00 (rev. 0x06)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0412 (rev. 0x06)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
vendor 0x8086 product 0x8c31 (USB serial bus, interface 0x30, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x8c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
vendor 0x8086 product 0x8c3d (serial communications, interface 0x02, revision 0x04) at pci0 dev 22 function 3 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x8c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg0 at hdaudio1: Realtek ALC887
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x8c10 (rev. 0xd4)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x8c14 (rev. 0xd4)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 94:de:80:b0:cf:7c
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x244e (rev. 0xd4)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 0x8086 product 0x244e (rev. 0x41)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x8c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x8c50 (rev. 0x04)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x8c02 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
atabus0 at ahcisata0 channel 2
atabus1 at ahcisata0 channel 3
atabus2 at ahcisata0 channel 5
vendor 0x8086 product 0x8c22 (SMBus serial bus, revision 0x04) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  67 us, pow   500 mW
acpicpu0: P0: FFH, lat  10 us, pow 84000 mW, 3001 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 84000 mW, 3000 MHz
acpicpu0: P2: FFH, lat  10 us, pow 76349 mW, 2800 MHz
acpicpu0: P3: FFH, lat  10 us, pow 73036 mW, 2700 MHz
acpicpu0: P4: FFH, lat  10 us, pow 65802 mW, 2500 MHz
acpicpu0: P5: FFH, lat  10 us, pow 62695 mW, 2400 MHz
acpicpu0: P6: FFH, lat  10 us, pow 55866 mW, 2200 MHz
acpicpu0: P7: FFH, lat  10 us, pow 52933 mW, 2100 MHz
acpicpu0: P8: FFH, lat  10 us, pow 46511 mW, 1900 MHz
acpicpu0: P9: FFH, lat  10 us, pow 40344 mW, 1700 MHz
acpicpu0: P10: FFH, lat  10 us, pow 37714 mW, 1600 MHz
acpicpu0: P11: FFH, lat  10 us, pow 31927 mW, 1400 MHz
acpicpu0: P12: FFH, lat  10 us, pow 29478 mW, 1300 MHz
acpicpu0: P13: FFH, lat  10 us, pow 24060 mW, 1100 MHz
acpicpu0: P14: FFH, lat  10 us, pow 21774 mW, 1000 MHz
acpicpu0: P15: FFH, lat  10 us, pow 16721 mW,  800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 2: device present, speed: 6.0Gb/s
ahcisata0 port 3: device present, speed: 6.0Gb/s
ahcisata0 port 5: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <KINGSTON SS200S330G>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 28626 MB, 58161 cyl, 16 head, 63 sec, 512 bytes/sect x 58626288 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <SanDisk SDSSDX120GG25>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <ST3320613AS>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3 at uhub1 port 1: vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
/: replaying log to memory
root file system type: ffs
/: replaying log to disk
/var: replaying log to disk
/usr: replaying log to disk
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/home: replaying log to disk
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1 (GENERIC)
total memory = 8071 MB
avail memory = 7821 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Gigabyte Technology Co., Ltd. B85M-HD3 (To be filled by O.E.M.)
mainbus0 (root)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-320)
ACPI Error: Null physical address for ACPI table [(null)] (20110623/tbutils-440)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i5-4430 CPU @ 3.00GHz, id 0x306c3
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
PTMD (INT3394) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 105.0 C, passive 108.0 C, passive cooling
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0c00 (rev. 0x06)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0412 (rev. 0x06)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
vendor 0x8086 product 0x8c31 (USB serial bus, interface 0x30, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x8c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
vendor 0x8086 product 0x8c3d (serial communications, interface 0x02, revision 0x04) at pci0 dev 22 function 3 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x8c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg0 at hdaudio1: Realtek ALC887
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x8c10 (rev. 0xd4)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x8c14 (rev. 0xd4)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 94:de:80:b0:cf:7c
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x244e (rev. 0xd4)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 0x8086 product 0x244e (rev. 0x41)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x8c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x8c50 (rev. 0x04)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x8c02 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
atabus0 at ahcisata0 channel 2
atabus1 at ahcisata0 channel 3
atabus2 at ahcisata0 channel 5
vendor 0x8086 product 0x8c22 (SMBus serial bus, revision 0x04) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  67 us, pow   500 mW
acpicpu0: P0: FFH, lat  10 us, pow 84000 mW, 3001 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 84000 mW, 3000 MHz
acpicpu0: P2: FFH, lat  10 us, pow 76349 mW, 2800 MHz
acpicpu0: P3: FFH, lat  10 us, pow 73036 mW, 2700 MHz
acpicpu0: P4: FFH, lat  10 us, pow 65802 mW, 2500 MHz
acpicpu0: P5: FFH, lat  10 us, pow 62695 mW, 2400 MHz
acpicpu0: P6: FFH, lat  10 us, pow 55866 mW, 2200 MHz
acpicpu0: P7: FFH, lat  10 us, pow 52933 mW, 2100 MHz
acpicpu0: P8: FFH, lat  10 us, pow 46511 mW, 1900 MHz
acpicpu0: P9: FFH, lat  10 us, pow 40344 mW, 1700 MHz
acpicpu0: P10: FFH, lat  10 us, pow 37714 mW, 1600 MHz
acpicpu0: P11: FFH, lat  10 us, pow 31927 mW, 1400 MHz
acpicpu0: P12: FFH, lat  10 us, pow 29478 mW, 1300 MHz
acpicpu0: P13: FFH, lat  10 us, pow 24060 mW, 1100 MHz
acpicpu0: P14: FFH, lat  10 us, pow 21774 mW, 1000 MHz
acpicpu0: P15: FFH, lat  10 us, pow 16721 mW,  800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 2: device present, speed: 6.0Gb/s
ahcisata0 port 3: device present, speed: 6.0Gb/s
ahcisata0 port 5: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <KINGSTON SS200S330G>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 28626 MB, 58161 cyl, 16 head, 63 sec, 512 bytes/sect x 58626288 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <SanDisk SDSSDX120GG25>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <ST3320613AS>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhidev0 at uhub3 port 5 configuration 1 interface 0
uhidev0: vendor 0x04d9 USB Keyboard, rev 1.10/3.10, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1
uhidev1: vendor 0x04d9 USB Keyboard, rev 1.10/3.10, addr 3, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0
uhidev2: vendor 0x192f USB Optical Mouse, rev 2.00/2.00, addr 4, iclass 3/1
ums0 at uhidev2: 5 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhub2: device problem, disabling port 3
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
/: replaying log to memory
root file system type: ffs
/: replaying log to disk
/var: replaying log to disk
/usr: replaying log to disk
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/home: replaying log to disk
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 954 MB, 3816 cyl, 16 head, 32 sec, 512 bytes/sect x 1953792 sectors
sd0: detached
scsibus0: detached
umass0: detached
umass0: at uhub3 port 2 (addr 5) disconnected
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 954 MB, 3816 cyl, 16 head, 32 sec, 512 bytes/sect x 1953792 sectors
sd0: detached
scsibus0: detached
umass0: detached
umass0: at uhub3 port 2 (addr 5) disconnected
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 954 MB, 3816 cyl, 16 head, 32 sec, 512 bytes/sect x 1953792 sectors
sd0: detached
scsibus0: detached
umass0: detached
umass0: at uhub3 port 1 (addr 5) disconnected
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 954 MB, 3816 cyl, 16 head, 32 sec, 512 bytes/sect x 1953792 sectors
sd0: detached
scsibus0: detached
umass0: detached
umass0: at uhub3 port 2 (addr 5) disconnected
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/1.10, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, PMAP> disk removable
sd0: 954 MB, 3816 cyl, 16 head, 32 sec, 512 bytes/sect x 1953792 sectors
Reply With Quote
  #4   (View Single Post)  
Old 18th July 2013
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,717
Thanked 214 Times in 189 Posts
Default

We now know it's a USB keyboard.
Code:
uhidev0 at uhub3 port 5 configuration 1 interface 0
uhidev0: vendor 0x04d9 USB Keyboard, rev 1.10/3.10, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
I don't see any USB related kernel errors reported, but I do see detachment and attachment of a Kingston DataTraveler USB stick. Do you have keyboard problems if the stick is never connected?
Reply With Quote
  #5   (View Single Post)  
Old 18th July 2013
tavrion tavrion is offline
Port Guard
 
Join Date: Jul 2013
Posts: 14
Thanked 0 Times in 0 Posts
Default

Just now, I unplugged all USB sticks and performed a soft reboot from debian. From grub I loaded into NetBSD. The three lights on the board did not light up - it was dead. I powered down for a few seconds, and booted back into NetBSD. Dead keyboard. Reset this time, booted into NetBSD with a fully functional keyboard. It just does not seem logical. Is it perhaps something to do with the fact that my hardware is quite recent and that the kernel may be a bit outdated?
Reply With Quote
  #6   (View Single Post)  
Old 18th July 2013
shep shep is offline
ISO Quartermaster
 
Join Date: May 2008
Location: Dry and Dusty
Posts: 595
Thanked 9 Times in 9 Posts
Default

I tried NetBSD 6.1 on an old laptop and can report that there have been some recent changes integrating a kernel driver for touchpads. Modular xorg from pkgsrc did better than the monolithic xorg but still was buggy. You may want to review the change logs at
ftp://nyftp.netbsd.org/pub/NetBSD-daily/ for the various versions and perhaps try one of the patched releases if the change log is encouraging. I do not know if the kernel driver for touchpads was backported into the 5x releases but that may be another option.
Reply With Quote
  #7   (View Single Post)  
Old 18th July 2013
tavrion tavrion is offline
Port Guard
 
Join Date: Jul 2013
Posts: 14
Thanked 0 Times in 0 Posts
Default

I will have a look. Thank you.
Reply With Quote
  #8   (View Single Post)  
Old 18th July 2013
IdOp's Avatar
IdOp IdOp is offline
Too dumb for a smartphone
 
Join Date: May 2008
Location: twisting on the daemon's fork(2)
Posts: 566
Thanked 14 Times in 13 Posts
Default

Quote:
Originally Posted by jggimi View Post
We now know it's a USB keyboard.
Code:
uhidev0 at uhub3 port 5 configuration 1 interface 0
uhidev0: vendor 0x04d9 USB Keyboard, rev 1.10/3.10, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
Yes and interestingly this info only appears in the second of the two dmesgs shown. Presumably the first dmesg is from a dead-keyboard boot, and the keyboard is not being initialized/recognized at all.

Question for tavrion: what happens if you unplug and re-plug-in the keyboard after a dead-keyboard boot? Does such reset make it work?
Reply With Quote
  #9   (View Single Post)  
Old 19th July 2013
tavrion tavrion is offline
Port Guard
 
Join Date: Jul 2013
Posts: 14
Thanked 0 Times in 0 Posts
Default

Okay, that is just weird. After a dead keyboard boot, I unplugged it and plugged it back in (same slot) and after the second reboot, it worked. What the ...

Last edited by tavrion; 19th July 2013 at 06:04 AM. Reason: just too many boots
Reply With Quote
Old 19th July 2013
ocicat ocicat is offline
Administrator
 
Join Date: Apr 2008
Posts: 2,888
Thanked 190 Times in 160 Posts
Default

Quote:
Originally Posted by tavrion View Post
After a dead keyboard boot, I unplugged it and plugged it back in (same slot) and after the second reboot, it worked.
I have three suggestions:
  • Simplify the configuration. If you are plugging the keyboard into a USB hub, for the purpose of testing, plug the keyboard directly into a USB port on the motherboard. If other USB devices are attached at boot, disconnect them. You are wanting to find the most minimal configuration which works or exhibits this behavior.
  • Attempt to recreate this behavior with a different USB keyboard to determine if the problem is with the original keyboard.
  • Lengthen the time between reboots -- in the vicinity of 20 minutes. I question whether there is a capacitor somewhere which needs to further discharge before a change in state is detected.
Quote:
I usually have this issue after restarting from another OS or a X11 crash.
Is NetBSD the only operating system where this behaviour is exhibited? Is this a multiboot configuration?

Last edited by ocicat; 19th July 2013 at 09:52 AM. Reason: clarity
Reply With Quote
Old 19th July 2013
tavrion tavrion is offline
Port Guard
 
Join Date: Jul 2013
Posts: 14
Thanked 0 Times in 0 Posts
Default

I have two usb devices connected (not sharing a hub) - the mouse and keyboard. I will go mouse-less to see if I can recreate this problem.

I have already recreated the problem with a different keyboard. That is the first thing that came to mind when the problem presented itself - try a different keyboard. USB microsoft keyboard. I have not had this problem when I 'trialed' FreeBSD and I have never had this issue when booting into debian. I have re-installed NetBSD quite a few times and the keyboard problem is always present.

The configuration is as follow. Three physical drives.
30GB SSD with a 15 GB slice for NetBSD.
120GB SSD with Debian Wheezy
320GB HDD for storage stuff.

Grub (installed from the debian installation) defaults to wheezy but I have added a manual entry in Grub to boot to NetBSD.

I will try some of your suggestions this weekend - there must be a logical explanation for this. Thank you for the suggestions.
Reply With Quote
Reply

Tags
amd64, keyboard, netbsd, troubleshoot

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DOS is not dead John Other OS 11 12th March 2014 02:46 PM
Why are these forums relatively dead? asemisldkfj Off-Topic 19 26th May 2013 06:42 PM
OpenIndiana is it dead or alive? gpatrick Solaris 3 27th September 2012 01:33 PM
BSDForums dead? corey_james Off-Topic 116 27th November 2008 03:44 AM
Tunnelblick is dead? Sunnz General software and network 2 6th July 2008 06:46 PM


All times are GMT. The time now is 07:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick