DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD General

OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 22nd April 2014
npmaier npmaier is offline
New User
 
Join Date: Aug 2011
Posts: 2
Thanked 0 Times in 0 Posts
Default Permissions of drm or video devices for better fps

Hi,

My glxgears gives me 100fps. Mplayer seems to run fine. My favorite game, the only one I play is Minetest, but it's only running at 8 fps. Last time I accidentally opened my permissions up to everything open 777 the fps went up to a good level.

This is for 3d hardware acceleration. So is there a quick fix? X -configure won't complete also.

Quote:
[ 88.488] (--) checkDevMem: using aperture driver /dev/xf86
[ 88.505] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
[ 88.645]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 88.645] X Protocol Version 11, Revision 0
[ 88.645] Build Operating System: OpenBSD 5.4 i386
[ 88.645] Current Operating System: OpenBSD tromo.my.domain 5.4 GENERIC#37 i386
[ 88.645] Build Date: 22 July 2013 07:54:46AM
[ 88.645]
[ 88.645] Current version of pixman: 0.30.0
[ 88.645] Before reporting problems, check
to make sure that you have the latest version.
[ 88.645] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 88.646] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 22 13:49:06 2014
[ 88.679] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 88.681] (==) No Layout section. Using the first Screen section.
[ 88.681] (==) No screen section available. Using defaults.
[ 88.681] (**) |-->Screen "Default Screen Section" (0)
[ 88.681] (**) | |-->Monitor "<default monitor>"
[ 88.682] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 88.682] (==) Disabling SIGIO handlers for input devices
[ 88.682] (==) Automatically adding devices
[ 88.682] (==) Automatically enabling devices
[ 88.682] (==) Not automatically adding GPU devices
[ 88.843] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 88.843] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 88.843] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 88.857] (II) Loader magic: 0x3c023040
[ 88.857] (II) Module ABI versions:
[ 88.857] X.Org ANSI C Emulation: 0.4
[ 88.857] X.Org Video Driver: 14.1
[ 88.857] X.Org XInput driver : 19.1
[ 88.857] X.Org Server Extension : 7.0
[ 88.857] (--) PCI:*(0:0:2:0) 8086:27a2:103c:30a5 rev 3, Mem @ 0xd0200000/524288, 0xc0000000/268435456, 0xd0300000/262144, I/O @ 0x00001800/8
[ 88.857] (--) PCI: (0:0:2:1) 8086:27a6:103c:30a5 rev 3, Mem @ 0xd0280000/524288
[ 88.858] Initializing built-in extension Generic Event Extension
[ 88.858] Initializing built-in extension SHAPE
[ 88.858] Initializing built-in extension MIT-SHM
[ 88.858] Initializing built-in extension XInputExtension
[ 88.858] Initializing built-in extension XTEST
[ 88.858] Initializing built-in extension BIG-REQUESTS
[ 88.858] Initializing built-in extension SYNC
[ 88.858] Initializing built-in extension XKEYBOARD
[ 88.858] Initializing built-in extension XC-MISC
[ 88.858] Initializing built-in extension SECURITY
[ 88.858] Initializing built-in extension XINERAMA
[ 88.858] Initializing built-in extension XFIXES
[ 88.858] Initializing built-in extension RENDER
[ 88.858] Initializing built-in extension RANDR
[ 88.858] Initializing built-in extension COMPOSITE
[ 88.858] Initializing built-in extension DAMAGE
[ 88.858] Initializing built-in extension MIT-SCREEN-SAVER
[ 88.858] Initializing built-in extension DOUBLE-BUFFER
[ 88.858] Initializing built-in extension RECORD
[ 88.858] Initializing built-in extension DPMS
[ 88.858] Initializing built-in extension X-Resource
[ 88.858] Initializing built-in extension XVideo
[ 88.858] Initializing built-in extension XVideo-MotionCompensation
[ 88.858] Initializing built-in extension XFree86-VidModeExtension
[ 88.858] Initializing built-in extension XFree86-DGA
[ 88.858] Initializing built-in extension XFree86-DRI
[ 88.858] Initializing built-in extension DRI2
[ 88.858] (II) LoadModule: "glx"
[ 88.890] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 88.904] (II) Module glx: vendor="X.Org Foundation"
[ 88.904] compiled for 1.14.1, module version = 1.0.0
[ 88.904] ABI class: X.Org Server Extension, version 7.0
[ 88.904] (==) AIGLX enabled
[ 88.904] Loading extension GLX
[ 88.904] (==) Matched intel as autoconfigured driver 0
[ 88.904] (==) Matched vesa as autoconfigured driver 1
[ 88.904] (==) Assigned the driver to the xf86ConfigLayout
[ 88.904] (II) LoadModule: "intel"
[ 88.905] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 88.929] (II) Module intel: vendor="X.Org Foundation"
[ 88.929] compiled for 1.14.1, module version = 2.20.19
[ 88.929] Module class: X.Org Video Driver
[ 88.929] ABI class: X.Org Video Driver, version 14.1
[ 88.948] (II) LoadModule: "vesa"
[ 88.949] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 88.966] (II) Module vesa: vendor="X.Org Foundation"
[ 88.966] compiled for 1.14.1, module version = 2.3.2
[ 88.966] Module class: X.Org Video Driver
[ 88.966] ABI class: X.Org Video Driver, version 14.1
[ 88.966] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 88.967] (II) VESA: driver for VESA chipsets: vesa
[ 88.978] (WW) Falling back to old probe method for vesa
[ 88.978] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 88.978] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 88.978] (==) intel(0): RGB weight 888
[ 88.978] (==) intel(0): Default visual is TrueColor
[ 88.979] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 88.979] (**) intel(0): Relaxed fencing disabled
[ 88.979] (**) intel(0): Wait on SwapBuffers? enabled
[ 88.979] (**) intel(0): Triple buffering? enabled
[ 88.979] (**) intel(0): Framebuffer tiled
[ 88.979] (**) intel(0): Pixmaps tiled
[ 88.979] (**) intel(0): 3D buffers tiled
[ 88.979] (**) intel(0): SwapBuffers wait enabled
[ 88.979] (==) intel(0): video overlay key set to 0x101fe
[ 88.980] (II) intel(0): Output LVDS1 has no monitor section
[ 89.014] (II) intel(0): Output VGA1 has no monitor section
[ 89.383] (II) intel(0): Output TV1 has no monitor section
[ 89.443] (II) intel(0): EDID for output LVDS1
[ 89.443] (II) intel(0): Manufacturer: AUO Model: 2174 Serial#: 0
[ 89.443] (II) intel(0): Year: 2005 Week: 1
[ 89.443] (II) intel(0): EDID Version: 1.3
[ 89.443] (II) intel(0): Digital Display Input
[ 89.443] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 89.443] (II) intel(0): Gamma: 2.20
[ 89.443] (II) intel(0): No DPMS capabilities specified
[ 89.443] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 89.443] (II) intel(0): First detailed timing is preferred mode
[ 89.443] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
[ 89.443] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 89.443] (II) intel(0): Manufacturer's mask: 0
[ 89.443] (II) intel(0): Supported detailed timing:
[ 89.443] (II) intel(0): clock: 71.1 MHz Image Size: 331 x 207 mm
[ 89.443] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 89.443] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 89.443] (II) intel(0): Unknown vendor-specific block f
[ 89.443] (II) intel(0): AUO
[ 89.444] (II) intel(0): B154EW02 V1
[ 89.444] (II) intel(0): EDID (in hex):
[ 89.444] (II) intel(0): 00ffffffffffff0006af742100000000
[ 89.444] (II) intel(0): 010f0103802115780a1cf59758508e27
[ 89.444] (II) intel(0): 27505400000001010101010101010101
[ 89.444] (II) intel(0): 010101010101c71b00a0502017303020
[ 89.444] (II) intel(0): 36004bcf100000180000000f00000000
[ 89.444] (II) intel(0): 00000000000000000020000000fe0041
[ 89.444] (II) intel(0): 554f0a202020202020202020000000fe
[ 89.444] (II) intel(0): 004231353445573032205631200a00aa
[ 89.444] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 89.444] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 89.444] (II) intel(0): Printing probed modes for output LVDS1
[ 89.444] (II) intel(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz eP)
[ 89.444] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 89.444] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 89.444] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 89.444] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 89.479] (II) intel(0): EDID for output VGA1
[ 89.845] (II) intel(0): EDID for output TV1
[ 89.845] (II) intel(0): Output LVDS1 connected
[ 89.845] (II) intel(0): Output VGA1 disconnected
[ 89.845] (II) intel(0): Output TV1 disconnected
[ 89.845] (II) intel(0): Using exact sizes for initial modes
[ 89.845] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 89.845] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 89.845] (II) intel(0): Kernel page flipping support detected, enabling
[ 89.845] (==) intel(0): DPI set to (96, 96)
[ 89.845] (II) Loading sub module "fb"
[ 89.845] (II) LoadModule: "fb"
[ 89.847] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 89.900] (II) Module fb: vendor="X.Org Foundation"
[ 89.900] compiled for 1.14.1, module version = 1.0.0
[ 89.900] ABI class: X.Org ANSI C Emulation, version 0.4
[ 89.900] (II) Loading sub module "dri2"
[ 89.900] (II) LoadModule: "dri2"
[ 89.900] (II) Module "dri2" already built-in
[ 89.900] (II) UnloadModule: "vesa"
[ 89.900] (II) Unloading vesa
[ 89.900] (==) Depth 24 pixmap format is 32 bpp
[ 89.915] (II) intel(0): [DRI2] Setup complete
[ 89.915] (II) intel(0): [DRI2] DRI driver: i915
[ 89.915] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 89.919] (II) UXA(0): Driver registered support for the following operations:
[ 89.919] (II) solid
[ 89.919] (II) copy
[ 89.919] (II) composite (RENDER acceleration)
[ 89.919] (II) put_image
[ 89.919] (II) get_image
[ 89.919] (==) intel(0): Backing store disabled
[ 89.919] (==) intel(0): Silken mouse disabled
[ 89.920] (II) intel(0): Initializing HW Cursor
[ 89.920] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 89.922] (==) intel(0): DPMS enabled
[ 89.922] (==) intel(0): Intel XvMC decoder disabled
[ 89.923] (II) intel(0): Set up textured video
[ 89.923] (II) intel(0): Set up overlay video
[ 89.923] (II) intel(0): direct rendering: DRI2 Enabled
[ 89.974] (--) RandR disabled
[ 90.182] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 90.182] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 90.182] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 90.182] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 90.182] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 90.182] (II) AIGLX: Loaded and initialized i915
[ 90.182] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 90.184] (II) intel(0): Setting screen physical size to 338 x 211
[ 90.873] (II) config/wscons: checking input device /dev/wskbd
[ 90.873] (II) wskbd: using layout us
[ 90.873] (II) LoadModule: "kbd"
[ 90.874] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 90.901] (II) Module kbd: vendor="X.Org Foundation"
[ 90.901] compiled for 1.14.1, module version = 1.7.0
[ 90.902] Module class: X.Org XInput Driver
[ 90.902] ABI class: X.Org XInput driver, version 19.1
[ 90.902] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 90.902] (**) /dev/wskbd: always reports core events
[ 90.902] (**) /dev/wskbd: always reports core events
[ 90.902] (**) Option "Protocol" "standard"
[ 90.902] (**) Option "XkbRules" "base"
[ 90.902] (**) Option "XkbModel" "pc105"
[ 90.902] (**) Option "XkbLayout" "us"
[ 90.902] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 91.368] (II) config/wscons: checking input device /dev/wsmouse0
[ 91.369] (II) LoadModule: "synaptics"
[ 91.370] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 91.404] (II) Module synaptics: vendor="X.Org Foundation"
[ 91.404] compiled for 1.14.1, module version = 1.7.1
[ 91.404] Module class: X.Org XInput Driver
[ 91.404] ABI class: X.Org XInput driver, version 19.1
[ 91.404] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 91.404] (**) /dev/wsmouse0: always reports core events
[ 91.404] (**) Option "Device" "/dev/wsmouse0"
[ 92.392] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution 65
[ 92.392] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution 110
[ 92.392] (**) /dev/wsmouse0: always reports core events
[ 92.392] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7)
[ 92.393] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5
[ 92.393] (**) synaptics: /dev/wsmouse0: (accel) MaxSpeed is now 1.75
[ 92.393] (**) synaptics: /dev/wsmouse0: (accel) AccelFactor is now 0.040
[ 92.393] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 92.393] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 92.393] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 92.393] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 92.901] (II) config/wscons: checking input device /dev/wsmouse
[ 92.901] (II) LoadModule: "ws"
[ 92.902] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 92.903] (II) Module ws: vendor="X.Org Foundation"
[ 92.903] compiled for 1.14.1, module version = 1.3.0
[ 92.903] Module class: X.Org XInput Driver
[ 92.903] ABI class: X.Org XInput driver, version 19.1
[ 92.903] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 92.903] (**) /dev/wsmouse: always reports core events
[ 92.903] (II) ws: /dev/wsmouse: debuglevel 0
[ 92.903] (**) Option "Device" "/dev/wsmouse"
[ 92.903] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 92.903] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 92.903] (**) ws: /dev/wsmouse: associated screen: 0
[ 92.903] (II) ws: /dev/wsmouse: minimum x position: 0
[ 92.903] (II) ws: /dev/wsmouse: maximum x position: 1279
[ 92.903] (II) ws: /dev/wsmouse: minimum y position: 0
[ 92.903] (II) ws: /dev/wsmouse: maximum y position: 799
[ 92.903] (==) ws: /dev/wsmouse: Buttons: 7
[ 92.903] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 92.903] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8)
[ 92.903] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 92.903] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 92.903] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 92.903] (**) /dev/wsmouse: (accel) acceleration threshold: 4
This is OpenBSD 5.4 GENERIC#37
thanks,
nate
Reply With Quote
  #2   (View Single Post)  
Old 22nd April 2014
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 3,710
Thanked 214 Times in 189 Posts
Default

You are running 5.4. 5.5 will be released on or about May 1. Note, from www.openbsd.org/55.html:
Quote:
inteldrm(4) has been updated to Linux 3.8.13.19 notably bringing Haswell stability fixes
This may help.

If you skip 5.5 and jump to -current (beyond 5.5 and in active development for 5.6), you get additional drm and inteldrm fixes... and you don't have to wait 9 more days.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Some qemu questions (networking,usb devices) sepuku OpenBSD Packages and Ports 7 19th March 2012 06:10 AM
x11/xf86-video-intel and x11/xf86-video-intel29? Carpetsmoker FreeBSD Ports and Packages 2 23rd October 2011 01:23 PM
OpenBSD Support for Realtek 802.11n USB devices J65nko News 0 18th December 2010 11:00 PM
OpenBSD OpenBSD developer wants USB devices ocicat News 0 9th November 2010 01:57 AM
Automounting USB devices with HAL/KDE vinegaroon FreeBSD General 1 13th June 2008 02:16 PM


All times are GMT. The time now is 04:15 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick