I am having a bit of an issue trying to determine which device from my "dmesg.boot" file is the item to create a
hostname.interface, as I am right now unable to create one that works.
I do see the motorola Android phone entry near the end of the file but ???????
In addition, when i do identify that interface.***** which entry is appropriate to place in that file init.autoconf or
dhcp.
I also have an X issue where startx as non root displays errors, however if i can get the interface problem resolved
i can move on to the X issue. All else appears to be ok for a fresh 7.2 install.
Since I haven't uploaded a file lately please forgive the dmesg.boot copy/paste
OpenBSD 7.2 (GENERIC.MP) #758: Tue Sep 27 11:57:54 MDT 2022
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 8525905920 (8130MB)
avail mem = 8250109952 (7867MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xcf42c000 (77 entries)
bios0: vendor Dell Inc. version "2.1.2" date 01/20/2014
bios0: Dell Inc. PowerEdge T320
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DMAR MCFG WD__ SLIC ERST HEST BERT EINJ TCPA PC__ SRAT SSDT
acpi0: wakeup devices PCI0(S5) EHC1(S3) EHC2(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz, 1800.04 MHz, 06-3e-04
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA, SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX ,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITS C,FSGSBASE,SMEP,ERMS,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 10MB 64b/line 20-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz, 1800.01 MHz, 06-3e-04
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA, SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX ,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITS C,FSGSBASE,SMEP,ERMS,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 10MB 64b/line 20-way L3 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz, 1800.01 MHz, 06-3e-04
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA, SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX ,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITS C,FSGSBASE,SMEP,ERMS,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 10MB 64b/line 20-way L3 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz, 1800.01 MHz, 06-3e-04
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA, SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX ,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITS C,FSGSBASE,SMEP,ERMS,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 10MB 64b/line 20-way L3 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec3f000, version 20, 24 pins, remapped
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PEX1)
acpiprt2 at acpi0: bus 9 (PEX2)
acpiprt3 at acpi0: bus 10 (PEX3)
acpiprt4 at acpi0: bus -1 (PEX4)
acpiprt5 at acpi0: bus -1 (PEX5)
acpiprt6 at acpi0: bus 12 (PEX6)
acpiprt7 at acpi0: bus 1 (PEX7)
acpiprt8 at acpi0: bus 2 (PEX8)
acpiprt9 at acpi0: bus 3 (PEX9)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
com1 at acpi0 COMA addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
com0 at acpi0 COMB addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpipci1 at acpi0 P0B1: 0x00000000 0x00000011 0x00000001
acpipci2 at acpi0 P1B1: 0x00000000 0x00000011 0x00000001
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu1 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu2 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu3 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
ipmi at mainbus0 not configured
cpu0: using IvyBridge MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E5 v2 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04: msi
pci1 at ppb0 bus 8
mfi0 at pci1 dev 0 function 0 "Symbios Logic MegaRAID SAS2008" rev 0x03: apic 1 int 2
mfi0: "PERC H310 Adapter", firmware 20.12.1-0002
scsibus1 at mfi0: 16 targets
scsibus2 at mfi0: 256 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, WDC WD5003ABYX-1, 1S05> naa.50014ee003e34d36
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, WDC WD5003ABYX-1, 1S05> naa.50014ee0ae8e1753
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus2 targ 2 lun 0: <ATA, WDC WD5003ABYX-1, 1S05> naa.50014ee0593887c6
sd2: 476940MB, 512 bytes/sector, 976773168 sectors
ppb1 at pci0 dev 1 function 1 "Intel E5 v2 PCIE" rev 0x04: msi
pci2 at ppb1 bus 9
ppb2 at pci0 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04: msi
pci3 at ppb2 bus 10
"Intel E5 v2 Address Map" rev 0x04 at pci0 dev 5 function 0 not configured
"Intel E5 v2 IIO RAS" rev 0x04 at pci0 dev 5 function 2 not configured
ppb3 at pci0 dev 17 function 0 "Intel C600 Virtual PCIE" rev 0x05
pci4 at ppb3 bus 11
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 0 not configured
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x05: apic 0 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 28 function 0 "Intel C600 PCIE" rev 0xb5: msi
pci5 at ppb4 bus 12
ppb5 at pci0 dev 28 function 4 "Intel C600 PCIE" rev 0xb5
pci6 at ppb5 bus 1
1:0:1: rom address conflict 0xdd000000/0x40000
bge0 at pci6 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI 1.2.46.0: msi, address f8:bc:12:54:f6:34
brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge1 at pci6 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI 1.2.46.0: msi, address f8:bc:12:54:f6:36
brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb6 at pci0 dev 28 function 6 "Intel C600 PCIE" rev 0xb5: msi
pci7 at ppb6 bus 2
ppb7 at pci0 dev 28 function 7 "Intel C600 PCIE" rev 0xb5
pci8 at ppb7 bus 3
ppb8 at pci8 dev 0 function 0 "Renesas SH7757 PCIE Switch" rev 0x00
pci9 at ppb8 bus 4
ppb9 at pci9 dev 0 function 0 "Renesas SH7757 PCIE Switch" rev 0x00
pci10 at ppb9 bus 5
ppb10 at pci10 dev 0 function 0 "Renesas SH7757 PCIE-PCI" rev 0x00
pci11 at ppb10 bus 6
vga1 at pci11 dev 0 function 0 "Matrox MGA G200eR" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb11 at pci9 dev 1 function 0 "Renesas SH7757 PCIE Switch" rev 0x00
pci12 at ppb11 bus 7
ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x05: apic 0 int 22
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb12 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci13 at ppb12 bus 13
pcib0 at pci0 dev 31 function 0 "Intel C600 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel C600 AHCI" rev 0x05: msi, AHCI 1.3
ahci0: port 4: 1.5Gb/s
scsibus3 at ahci0: 32 targets
cd0 at scsibus3 targ 4 lun 0: <HL-DT-ST, DVD-ROM DH50N, A100> removable
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci14 at mainbus0 bus 63
"Intel E5 v2 QPI Link" rev 0x04 at pci14 dev 8 function 0 not configured
"Intel E5 v2 QPI Link" rev 0x04 at pci14 dev 9 function 0 not configured
"Intel E5 v2 PCU" rev 0x04 at pci14 dev 10 function 0 not configured
"Intel E5 v2 PCU" rev 0x04 at pci14 dev 10 function 1 not configured
"Intel E5 v2 PCU" rev 0x04 at pci14 dev 10 function 2 not configured
"Intel E5 v2 PCU" rev 0x04 at pci14 dev 10 function 3 not configured
"Intel E5 v2 UBOX" rev 0x04 at pci14 dev 11 function 0 not configured
"Intel E5 v2 UBOX" rev 0x04 at pci14 dev 11 function 3 not configured
"Intel E5 v2 Unicast" rev 0x04 at pci14 dev 12 function 0 not configured
"Intel E5 v2 Unicast" rev 0x04 at pci14 dev 12 function 1 not configured
"Intel E5 v2 Unicast" rev 0x04 at pci14 dev 13 function 0 not configured
"Intel E5 v2 Unicast" rev 0x04 at pci14 dev 13 function 1 not configured
"Intel E5 v2 Home Agent" rev 0x04 at pci14 dev 14 function 0 not configured
"Intel E5 v2 Home Agent" rev 0x04 at pci14 dev 14 function 1 not configured
"Intel E5 v2 TA" rev 0x04 at pci14 dev 15 function 0 not configured
"Intel E5 v2 RAS" rev 0x04 at pci14 dev 15 function 1 not configured
"Intel E5 v2 TAD" rev 0x04 at pci14 dev 15 function 2 not configured
"Intel E5 v2 TAD" rev 0x04 at pci14 dev 15 function 3 not configured
"Intel E5 v2 TAD" rev 0x04 at pci14 dev 15 function 4 not configured
"Intel E5 v2 TAD" rev 0x04 at pci14 dev 15 function 5 not configured
"Intel E5 v2 Thermal" rev 0x04 at pci14 dev 16 function 0 not configured
"Intel E5 v2 Thermal" rev 0x04 at pci14 dev 16 function 1 not configured
"Intel E5 v2 Error" rev 0x04 at pci14 dev 16 function 2 not configured
"Intel E5 v2 Error" rev 0x04 at pci14 dev 16 function 3 not configured
"Intel E5 v2 Thermal" rev 0x04 at pci14 dev 16 function 4 not configured
"Intel E5 v2 Thermal" rev 0x04 at pci14 dev 16 function 5 not configured
"Intel E5 v2 Error" rev 0x04 at pci14 dev 16 function 7 not configured
"Intel E5 v2 R2PCIE" rev 0x04 at pci14 dev 19 function 0 not configured
"Intel E5 v2 QPI Link Monitor" rev 0x04 at pci14 dev 19 function 1 not configured
"Intel E5 v2 QPI" rev 0x04 at pci14 dev 19 function 4 not configured
"Intel E5 v2 QPI Link Monitor" rev 0x04 at pci14 dev 19 function 5 not configured
"Intel E5 v2 SAD" rev 0x04 at pci14 dev 22 function 0 not configured
"Intel E5 v2 Broadcast" rev 0x04 at pci14 dev 22 function 1 not configured
"Intel E5 v2 Broadcast" rev 0x04 at pci14 dev 22 function 2 not configured
pci15 at mainbus0 bus 127
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub2 port 6 configuration 1 interface 0 "no manufacturer Gadget USB HUB" rev 2.00/0.00 addr 3
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Avocent Keyboard/Mouse Function" rev 2.00/0.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1 "Avocent Keyboard/Mouse Function" rev 2.00/0.00 addr 4
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub3 port 1 configuration 1 interface 2 "Avocent Keyboard/Mouse Function" rev 2.00/0.00 addr 4
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev3 at uhub4 port 7 configuration 1 interface 0 "Holtek product 0x1400" rev 1.10/1.42 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev4 at uhub4 port 7 configuration 1 interface 1 "Holtek product 0x1400" rev 1.10/1.42 addr 3
uhidev4: iclass 3/1, 3 report ids
ums2 at uhidev4 reportid 1: 5 buttons, Z dir
wsmouse2 at ums2 mux 0
ucc0 at uhidev4 reportid 2: 4 usages, 4 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev4 reportid 3: input=1, output=0, feature=0
ugen0 at uhub4 port 8 "motorola moto g play (2021)" rev 2.00/4.19 addr 4
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (102c0e34980577df.a) swap on sd0b dump on sd0b