View Single Post
  #1   (View Single Post)  
Old 22nd July 2008
revzalot's Avatar
revzalot revzalot is offline
Shell Scout
 
Join Date: May 2008
Posts: 123
Default /bsd: ral0: device timeout

I have a Airlink 101 PCI card that uses the ral0 driver in my firewall/ap but recently I've been getting the device timeout error lately. It's now useless. Here's my dmesg:

Code:
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 732 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXR,SSE
real mem  = 266616832 (254MB)
avail mem = 249741312 (238MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/28/00, BIOS32 rev. 0 @ 0xffe90, SMBIOSrev. 2.3 @ 0xf0450 (58 entries)
bios0: vendor Dell Computer Corporation version "A02" date 01/28/2000
bios0: Dell Computer Corporation OptiPlex GX110
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbc40/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E Host" rev 0x03
agp0 at pchb0: aperture at 0xf4000000, size 0x4000000
vga1 at pci0 dev 1 function 0 "Intel 82810E Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
rl0 at pci1 dev 7 function 0 "Realtek 8139" rev 0x10: irq 9, address 00:14:d1:1:81:d2
rlphy0 at rl0 phy 0: RTL internal PHY
ral0 at pci1 dev 8 function 0 "Ralink RT2661" rev 0x00: irq 10, address 00:14:a:d9:0f:61
ral0: MAC/BBP RT2661D, RF RT2529 (MIMO XR)
xl0 at pci1 dev 12 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5, address00:b0:d0:86:61:1c
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02: 24-bit timer a 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 ired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 51536H2>
wd0: 16-sector PIO, LBA, 14594MB, 29888820 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, q008> SCSI0 5/cdrom remoable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: SMBus disable
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask f945 netmask ff65 ttymask ffe7
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev1.10/17.11 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev1.10/17.11 addr 2
uhidev1: iclass 3/1, 4 report ids
ums0 at uhidev1 reportid 1: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=3, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhidev1 detached
uid 0 on /mnt/floppy: file system full
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
Reply With Quote