Problem with installing FreeBSD 7.0 Stable

[likemandrake]

Hello

I couldn't install FreeBSD 7.0 stable on my Compaq Evo N800c laptop.
Install CD booting process freeze in the same place every time.

When I choose option 1 (default) on boot menu, I see messages like http://link.imgshare.us/05j2q2.

When I choose option 2 (Without ACPI) or 3 (Safe Mode), I see messages
like http://link.imgshare.us/05j30v.

I shoot all fotos on my camera, when boot process is freezing.

So, I have problem with USB controller, I think. I try some booting
kernel options, like usb_load="no", hint.acpi.0.disabled="1",
hint.ehci.0.disabled="1" and some one, but I don't see any effects.

Best regards!

PS: I'm really sorry for my English...

PS2: 'lspci -v -nn' in linux Ubuntu shows:

00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset Host
Bridge [8086:1a30] (rev 04)
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, fast devsel, latency 0
Memory at a0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset AGP B
ridge [8086:1a31] (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 80300000-803fffff
Prefetchable memory behind bridge: 88000000-900fffff

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448]
(rev 42) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00002000-00002fff

00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248
c] (rev 02)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [80
86:248a] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 4440 [size=16]
Memory at 90100000 (32-bit, non-prefetchable) [size=1K]

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM AC'97
Audio Controller [8086:2485] (rev 02)
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at 4000 [size=256]
I/O ports at 4400 [size=64]

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M
7 LW [Radeon Mobility 7500] [1002:4c57] (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, stepping, 66MHz, medium devsel, latency 66, IRQ 11
Memory at 88000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at 80380000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 90000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

02:04.0 Communication controller [0780]: Agere Systems LT WinModem [11c1:0450] (
rev 02)
Subsystem: AMBIT Microsystem Corp. Evo N600c [1468:0450]
Flags: bus master, medium devsel, latency 66, IRQ 5
Memory at 80280000 (32-bit, non-prefetchable) [size=256]
I/O ports at 2440 [size=8]
I/O ports at 2000 [size=256]
Capabilities: [f8] Power Management version 2

02:06.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Control
ler [104c:ac50] (rev 02)
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 94000000-97fff000 (prefetchable)
Memory window 1: 98000000-9bfff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
16-bit legacy interface ports at 0001

02:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100 VE
(LOM) Ethernet Controller [8086:1031] (rev 42)
Subsystem: Compaq Computer Corporation Unknown device [0e11:0093]
Flags: bus master, medium devsel, latency 66, IRQ 10
Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 2400 [size=64]
Capabilities: [dc] Power Management version 2

02:0e.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at 80180000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

02:0e.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at 80200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

02:0e.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02) (pro g-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Unknown device [0e11:004a]
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at 90100400 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

[BSDKaffee]

Those links to the pictures aren't working. Please post them in the forum itself or retype them and post them.

[likemandrake]

I'm sorry... The links are working now

Thanks for your reply.

Best regards.