DaemonForums  

Go Back   DaemonForums > NetBSD > NetBSD Installation and Upgrading

NetBSD Installation and Upgrading Have trouble getting NetBSD on your toaster?

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 28th March 2024
portunak portunak is offline
New User
 
Join Date: Mar 2024
Posts: 6
Default NetBSD on Synology 107+

Greetings to the whole group.
I am a systems enthusiast, I use linux for several years in an exclusive way.
I’m trying to learn (never ends) with a little difficulty with the English language... so you’ll forgive me if I use a translator...

I am currently working on a synology 107+ that I have been doing for many years... I have put it back doing some hardware maintenance.
the problem was triggered when I realized that the official website was no longer available firmware for my model....
searching on the internet an alternative I came to NetBSD...
I followed this quida:
https://wiki.netbsd.org/ports/sandpoint/instsynology/

but my limitations arose when I failed to boot altboot.bin via TFTP....
I hope to find among you some advice and some tips to get ahead of this issue... and clearly increase personal knowledge...
I attach a bit of info in the following post...
thanks

Giuseppe

Last edited by portunak; 28th March 2024 at 11:14 AM.
Reply With Quote
  #2   (View Single Post)  
Old 28th March 2024
portunak portunak is offline
New User
 
Join Date: Mar 2024
Posts: 6
Default

allego
screenshot of the standard boot machine
Name:  Selezione_001.png
Views: 158
Size:  13.2 KB
screenshots of possible commands
Name:  Selezione_002.png
Views: 157
Size:  11.3 KB
screenshot of the altboot.bin startup attempt
Name:  Selezione_003.png
Views: 158
Size:  2.7 KB
screenshot of machine ping in lan (absent)
Name:  Selezione_005.png
Views: 159
Size:  14.0 KB

track loading does not take place and stops at this point

(in the next post I put the details of the installed tftp server)
Reply With Quote
  #3   (View Single Post)  
Old 28th March 2024
portunak portunak is offline
New User
 
Join Date: Mar 2024
Posts: 6
Default

I put the details of the server I prepared for boot...
(here probably falls the donkey)

questo è stato effettuato su un Synology in lan:

Name:  Selezione_006.png
Views: 159
Size:  34.2 KB

Name:  Selezione_007.png
Views: 159
Size:  23.0 KB

Name:  Selezione_008.png
Views: 160
Size:  148.9 KB
Reply With Quote
  #4   (View Single Post)  
Old 28th March 2024
portunak portunak is offline
New User
 
Join Date: Mar 2024
Posts: 6
Default

this is what I managed to do... (or rather not do)
hope for some help...

thanks
Reply With Quote
  #5   (View Single Post)  
Old 2nd April 2024
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 4,167
Default

The wiki document says
Code:
_MPC824X > setenv ipaddr 192.168.0.106
_MPC824X > setenv serverip 192.168.0.5
_MPC824X > setenv netmask 255.255.255.0
_MPC824X > tftpboot 0x1000000 altboot.bin
In the screenshot of your attempt to load the altboot utility you forgot to use the hexadecimal specifier : 0x
You used 1000000 while it should have been 0x1000000

PS Sorry, it seems that 1000000 has been interpreted correctly as 0x1000000

Don't know how to troubleshoot the tftpboot hangup. If you have a serial line connection you could use the alternative method with Kermit to load altboot
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump

Last edited by J65nko; 2nd April 2024 at 12:21 AM.
Reply With Quote
  #6   (View Single Post)  
Old 5th April 2024
portunak portunak is offline
New User
 
Join Date: Mar 2024
Posts: 6
Default

if I'm wrong, to use kermit you need to launch the "loadb" command which is not included in my U-boot. unless I can use some other command listed in the help list posted on... I have no idea how to proceed... if you have any info please post.

Thank you
Reply With Quote
  #7   (View Single Post)  
Old 8th April 2024
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 4,167
Default

It looks like you used Windows as a TFTP server. Maybe you try with using NetBSD as TFTP server?

I also wonder whether it is needed to enable PXE. Try to disable it.
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #8   (View Single Post)  
Old 10th April 2024
portunak portunak is offline
New User
 
Join Date: Mar 2024
Posts: 6
Default

Thanks for the reply.
as a server, I used a synology 118.
I'll try to exclude PXE, but I don't think I'll be successful.
Thank you
Reply With Quote
  #9   (View Single Post)  
Old 11th April 2024
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 4,167
Default

If you configure NetBSD or OpenBSD (on an USB stick for example) as tftp server you can run tcpdump to watch and analyze the network traffic. That way you can see what exactly is the cause why the file is not transferred completely.
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rsync to compare two Synology - NAS machines? Broodjegehaktmetmayo Other BSD and UNIX/UNIX-like 0 24th June 2012 12:02 PM


All times are GMT. The time now is 02:27 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick