DaemonForums  

Go Back   DaemonForums > OpenBSD > OpenBSD Packages and Ports

OpenBSD Packages and Ports Installation and upgrading of packages and ports on OpenBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 12th August 2016
psypro psypro is offline
Package Pilot
 
Join Date: Mar 2016
Location: Continent:Europe
Posts: 150
Default Dual screen gpu support problem, 1 monitor

I have previously posted about 5,9 current. And to a tip fromJiggim that worked, old tread at http://daemonforums.org/showthread.php?t=9749.
Now trying 6.0 current.
I am writing this from Lumina, but it is werdly splitted up into a 1080 part and a vga part, at the same monitor. Please some help.

I have created and added to /etc/X11/xorg.conf.d

Code:
Section "Monitor"
	Identifier "VGA1"
	Option "ignore" "true"
EndSection
/var/log/Xorg.0.log
Code:
[    27.258] (--) checkDevMem: using aperture driver /dev/xf86
[    27.265] (--) Using wscons driver on /dev/ttyC4
[    27.273] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    27.273] X Protocol Version 11, Revision 0
[    27.273] Build Operating System: OpenBSD 6.0 amd64 
[    27.273] Current Operating System: OpenBSD desktop.my.domain 6.0 GENERIC.MP#2347 amd64
[    27.274] Build Date: 11 August 2016  08:25:24PM
[    27.274]  
[    27.274] Current version of pixman: 0.32.8
[    27.274] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    27.274] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.274] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 12 14:55:36 2016
[    27.275] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[    27.276] (==) No Layout section.  Using the first Screen section.
[    27.276] (==) No screen section available. Using defaults.
[    27.276] (**) |-->Screen "Default Screen Section" (0)
[    27.276] (**) |   |-->Monitor "<default monitor>"
[    27.277] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.277] (==) Disabling SIGIO handlers for input devices
[    27.277] (==) Automatically adding devices
[    27.277] (==) Automatically enabling devices
[    27.277] (==) Not automatically adding GPU devices
[    27.277] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    27.283] (==) FontPath set to:
	/usr/X11R6/lib/X11/fonts/misc/,
	/usr/X11R6/lib/X11/fonts/TTF/,
	/usr/X11R6/lib/X11/fonts/OTF/,
	/usr/X11R6/lib/X11/fonts/Type1/,
	/usr/X11R6/lib/X11/fonts/100dpi/,
	/usr/X11R6/lib/X11/fonts/75dpi/
[    27.283] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    27.283] (II) The server relies on wscons to provide the list of input devices.
	If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    27.284] (II) Loader magic: 0x1c5894c34020
[    27.284] (II) Module ABI versions:
[    27.284] 	X.Org ANSI C Emulation: 0.4
[    27.284] 	X.Org Video Driver: 20.0
[    27.284] 	X.Org XInput driver : 22.1
[    27.284] 	X.Org Server Extension : 9.0
[    27.284] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    27.284] (--) PCI: (0:1:0:0) 10de:1401:3842:2966 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    27.284] (II) LoadModule: "glx"
[    27.286] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    27.297] (II) Module glx: vendor="X.Org Foundation"
[    27.297] 	compiled for 1.18.4, module version = 1.0.0
[    27.297] 	ABI class: X.Org Server Extension, version 9.0
[    27.297] (==) AIGLX enabled
[    27.297] (==) Matched intel as autoconfigured driver 0
[    27.297] (==) Matched vesa as autoconfigured driver 1
[    27.297] (==) Assigned the driver to the xf86ConfigLayout
[    27.297] (II) LoadModule: "intel"
[    27.298] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    27.300] (II) Module intel: vendor="X.Org Foundation"
[    27.300] 	compiled for 1.18.4, module version = 2.99.916
[    27.300] 	Module class: X.Org Video Driver
[    27.300] 	ABI class: X.Org Video Driver, version 20.0
[    27.300] (II) LoadModule: "vesa"
[    27.301] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[    27.301] (II) Module vesa: vendor="X.Org Foundation"
[    27.301] 	compiled for 1.18.4, module version = 2.3.3
[    27.301] 	Module class: X.Org Video Driver
[    27.301] 	ABI class: X.Org Video Driver, version 20.0
[    27.301] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    27.302] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    27.302] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    27.302] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    27.302] (II) VESA: driver for VESA chipsets: vesa
[    27.303] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[    27.303] (WW) Falling back to old probe method for vesa
[    27.304] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    27.304] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    27.304] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    27.304] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    27.304] (==) intel(0): RGB weight 888
[    27.304] (==) intel(0): Default visual is TrueColor
[    27.305] (II) intel(0): Output VGA1 has no monitor section
[    27.305] (II) intel(0): Enabled output VGA1
[    27.305] (II) intel(0): Output HDMI1 has no monitor section
[    27.305] (II) intel(0): Enabled output HDMI1
[    27.305] (II) intel(0): Output DP1 has no monitor section
[    27.305] (II) intel(0): Enabled output DP1
[    27.305] (--) intel(0): Using a maximum size of 64x64 for hardware cursors
[    27.305] (II) intel(0): Output VIRTUAL1 has no monitor section
[    27.305] (II) intel(0): Enabled output VIRTUAL1
[    27.305] (--) intel(0): Output VGA1 using initial mode 1024x768 on pipe 0
[    27.305] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 1
[    27.306] (==) intel(0): TearFree disabled
[    27.306] (==) intel(0): DPI set to (96, 96)
[    27.306] (II) Loading sub module "dri2"
[    27.306] (II) LoadModule: "dri2"
[    27.306] (II) Module "dri2" already built-in
[    27.306] (II) Loading sub module "present"
[    27.306] (II) LoadModule: "present"
[    27.306] (II) Module "present" already built-in
[    27.306] (II) UnloadModule: "vesa"
[    27.306] (II) Unloading vesa
[    27.306] (==) Depth 24 pixmap format is 32 bpp
[    27.309] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    27.309] (==) intel(0): Backing store enabled
[    27.309] (==) intel(0): Silken mouse disabled
[    27.309] (II) intel(0): HW Cursor enabled
[    27.309] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.311] (==) intel(0): DPMS enabled
[    27.311] (WW) intel(0): [DRI2] Direct rendering is not supported when VGA arb is necessary for the device
[    27.311] (II) intel(0): hardware support for Present enabled
[    27.311] (--) RandR disabled
[    27.311] (II) Found 2 VGA devices: arbiter wrapping enabled
[    27.323] (II) AIGLX: Screen 0 is not DRI2 capable
[    27.323] (EE) AIGLX: reverting to software rendering
[    27.348] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.349] (II) AIGLX: Loaded and initialized swrast
[    27.349] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    27.352] (II) intel(0): switch to mode 1024x768@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[    27.366] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[    27.375] (II) intel(0): Setting screen physical size to 508 x 285
[    27.461] (II) config/wscons: checking input device /dev/wskbd
[    27.461] (II) wskbd: using layout no
[    27.461] (II) LoadModule: "kbd"
[    27.462] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    27.463] (II) Module kbd: vendor="X.Org Foundation"
[    27.463] 	compiled for 1.18.4, module version = 1.8.1
[    27.463] 	Module class: X.Org XInput Driver
[    27.463] 	ABI class: X.Org XInput driver, version 22.1
[    27.463] (II) Using input driver 'kbd' for '/dev/wskbd'
[    27.463] (**) /dev/wskbd: always reports core events
[    27.463] (**) /dev/wskbd: always reports core events
[    27.463] (**) Option "Protocol" "standard"
[    27.463] (**) Option "XkbRules" "base"
[    27.463] (**) Option "XkbModel" "pc105"
[    27.463] (**) Option "XkbLayout" "no"
[    27.463] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[    27.978] (II) config/wscons: checking input device /dev/wsmouse
[    27.978] (II) LoadModule: "ws"
[    27.978] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    27.979] (II) Module ws: vendor="X.Org Foundation"
[    27.979] 	compiled for 1.18.4, module version = 1.3.0
[    27.979] 	Module class: X.Org XInput Driver
[    27.979] 	ABI class: X.Org XInput driver, version 22.1
[    27.979] (II) Using input driver 'ws' for '/dev/wsmouse'
[    27.979] (**) /dev/wsmouse: always reports core events
[    27.979] (II) ws: /dev/wsmouse: debuglevel 0
[    27.979] (**) Option "Device" "/dev/wsmouse"
[    27.979] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    27.979] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    27.979] (**) ws: /dev/wsmouse: associated screen: 0
[    27.979] (II) ws: /dev/wsmouse: minimum x position: 0
[    27.979] (II) ws: /dev/wsmouse: maximum x position: 1919
[    27.979] (II) ws: /dev/wsmouse: minimum y position: 0
[    27.979] (II) ws: /dev/wsmouse: maximum y position: 1079
[    27.979] (==) ws: /dev/wsmouse: Buttons: 7
[    27.980] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    27.980] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
[    27.980] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    27.980] (**) /dev/wsmouse: (accel) acceleration profile 0
[    27.980] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    27.980] (**) /dev/wsmouse: (accel) acceleration threshold: 4
Reply With Quote
  #2   (View Single Post)  
Old 12th August 2016
psypro psypro is offline
Package Pilot
 
Join Date: Mar 2016
Location: Continent:Europe
Posts: 150
Default

I fixed.
I had made a typo.

Make dir /etc/X11/xorg.conf.d
Make file : /etc/X11/xorg.conf.d/xorg.conf

Code:
Section "Monitor"
	Identifier "VGA1"
	Option "ignore" "true"
EndSection
Reply With Quote
  #3   (View Single Post)  
Old 12th August 2016
jggimi's Avatar
jggimi jggimi is offline
More noise than signal
 
Join Date: May 2008
Location: USA
Posts: 7,838
Default

You may have a provisioning problem. Your log shows (**) for any configurations that come from your various xorg.conf files. You have a Screen defined without a monitor.
Code:
[    27.276] (**) |-->Screen "Default Screen Section" (0)
[    27.276] (**) |   |-->Monitor "<default monitor>"
[    27.277] (==) No monitor specified for screen "Default Screen Section".
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Radeon resolution & dual-screen? LeFrettchen OpenBSD General 4 1st June 2018 01:08 PM
Lumina-DE screen problem psypro OpenBSD Packages and Ports 5 28th March 2016 04:34 PM
my monitor(with no X) happens to deconnect ...a means to "monitor" its behavior ? spermwhale_warrior NetBSD General 2 1st September 2014 01:14 PM
ATI Driver + Dual Monitor? kasumi OpenBSD General 16 1st October 2011 07:09 PM
dual monitor ATI issues whomever OpenBSD General 16 27th August 2010 07:43 PM


All times are GMT. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick