Screenshots of WireGuard Android app

[J65nko]

Two screenshots of the Wireguard Android app, installed on my Lenovo Android tablet.

[J65nko]

The configuration of the wg0 interface on the "server" siralas.nl:

# ifconfig wg0 
wg0: flags=80c7<UP,BROADCAST,DEBUG,RUNNING,NOARP,MULTICAST> mtu 1420
        index 4 priority 0 llprio 3
        wgport 5050
        wgpubkey 7hJ4zZct+HMyAE1hMD6x60gcP9mM2fF75NJBHckHAmg=
        wgpeer sCPnl+5YH1MVsCJ2FFaim14Mo4Qky7Pd1HFxmbQ5oVo=
                wgendpoint 77.175.236.228 53335
                tx: 455136, rx: 103272
                last handshake: 29 seconds ago
                wgaip 10.17.89.12/32
        groups: wg
        inet 10.17.89.1 netmask 0xffffff00 broadcast 10.17.89.255

If you issue the same command as non-root user, some information is left out:

$ ifconfig wg0
wg0: flags=80c7<UP,BROADCAST,DEBUG,RUNNING,NOARP,MULTICAST> mtu 1420
        index 4 priority 0 llprio 3
        wgport 5050
        groups: wg
        inet 10.17.89.1 netmask 0xffffff00 broadcast 10.17.89.255

This configuration only allows the Lenovo tablet to tunnel traffic to whatever is running / LISTENing on the 10.17.89.1 address.