|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Xorg related error
Greetings all,
I have received an error on xconsole: Code:
error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A Code:
# ps -13414 -o command Code:
COMMAND /usr/X11R6/bin/X :0 vt05 -auth /etc/X11/xenodm/authdir/authfiles/A:0-ICrkYi (Xo Code:
/usr/X11R6/bin/X Code:
/usr/X11R6/bin/Xorg So how do I proceed? Kindest regards, M |
|
||||
This is another case where it would help to see the 'dmesg' output, maybe not all of it , but , for example on mine it shows at the bottom, I get the same error message when I disconnect my phone , which is tethered for internet access. Don't worry about clutter, the more details , the easier it is for others to help.
===== Example ==== When I tether my phone, or when I turn the tethering on or off, it gives this error message. Example on mine: xconsole shows: Code:
error: [drm:pid77448:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A Code:
$ ps -77448 -o command COMMAND /usr/X11R6/bin/X :0 -auth /home/garry/.serverauth.PxOJgqRWFX (Xorg) The 'dmesg' output shows: ( a small part only) Code:
urndis0: using RNDIS, address c6:8d:d2:d2:fd:b9 urndis0 detached ugen0 at uhub1 port 1 "MediaTek BLU" rev 2.00/ff.ff addr 2 ugen0 detached urndis0 at uhub1 port 1 configuration 1 interface 0 "MediaTek BLU" rev 2.00/ff.ff addr 2 urndis0: using RNDIS, address 6a:97:d5:d1:13:27 error: [drm:pid77448:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A In your case though, I think it would be to your advantage to show the entire dmesg output, or at least tell us what you did, or were doing when it triggered that error, ? "dmesg" will show that. === edit, side note: Quote:
Code:
man hexedit Quote:
__________________
My best friends are parrots Last edited by PapaParrot; 10th June 2018 at 10:11 PM. |
|
|||
Hi GarryR,
thank you for the prompt to post the dmesg output. Code:
OpenBSD 6.3 (GENERIC.MP) #3: Fri May 18 00:06:26 CEST 2018 root@syspatch-63-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.M P real mem = 4268425216 (4070MB) avail mem = 4131991552 (3940MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (71 entries) bios0: vendor LENOVO version "7OETC4WW (2.24 )" date 04/09/2010 bios0: LENOVO 8932CTO acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT S SDT acpi0: wakeup devices LID_(S3) SLPB(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4 (S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDE F(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SS SE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu0: 1MB 64b/line 4-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.1.1.1, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SS SE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN cpu1: 1MB 64b/line 4-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins , remapped to apid 1 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus 4 (EXP2) acpiprt5 at acpi0: bus -1 (EXP3) acpiprt6 at acpi0: bus -1 (EXP4) acpiprt7 at acpi0: bus 21 (PCI1) acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB4, EHC0, EHC1 acpitz0 at acpi0: critical temperature is 127 degC acpitz1 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB "LEN0005" at acpi0 not configured tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x32031114 rev 0x9 acpibat0 at acpi0: BAT0 model "42T4544" serial 3352 type LION oem "SONY" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) acpivideo0 at acpi0: VID_ acpivout0 at acpivideo0: LCD0 acpivideo1 at acpi0: VID_ cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c inteldrm0 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0: msi inteldrm0: 848x480, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 ad dr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi azalia0: codecs: Conexant CX20549 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: msi pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: msi pci2 at ppb1 bus 3 wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW1, address 00:1f:3c:4d:d5:04 ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: msi pci3 at ppb2 bus 4 bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2 (0xb 002): msi, address 00:1c:25:91:38:43 brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 ad dr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 pci4 at ppb3 bus 21 cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA780, CB01> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi, AHCI 1.1 ahci0: port 0: 1.5Gb/s scsibus2 at ahci0: 32 targets sd0 at scsibus2 targ 0 lun 0: <ATA, Hitachi HTS72502, PC2O> SCSI3 0/direct fixed naa.5000cca5b8ea7c34 sd0: 238475MB, 512 bytes/sector, 488397168 sectors ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23 iic0 at ichiic0 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 ad dr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 ad dr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 ad dr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 ad dr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 ad dr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: ALPS Dualpoint, version 0x7301 wsmouse1 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 uhidev0 at uhub4 port 1 configuration 1 interface 0 "A4Tech USB Mouse" rev 1.10/ 0.14 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 8 buttons, Z dir wsmouse2 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (688839a69bbbadce.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted wpi0: radio is disabled by hardware switch wpi0: could not initialize hardware vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 vblank wait timed out on crtc 1 error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A umass0 at uhub0 port 3 configuration 1 interface 0 "StoreJet Transcend StoreJetut on crtc 1 Transcend" rev 2.00/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus5 at umass0: 2 targets, initiator 0 sd1 at scsibus5 targ 1 lun 0: <StoreJet, Transcend, DK02> SCSI2 0/direct fixed sd1: 190782MB, 512 bytes/sector, 390721968 sectors error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A ntfs_mount(): MNT_UPDATE not supported sd1 detached scsibus5 detached umass0 detached error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A umass0 at uhub0 port 3 configuration 1 interface 0 "vendor 0x090c product 0x1000 " rev 2.00/11.00 addr 2 umass0: using SCSI over Bulk-Only scsibus5 at umass0: 2 targets, initiator 0 sd1 at scsibus5 targ 1 lun 0: <, , 1100> SCSI2 0/direct removable serial.090c100 0210190000793 sd1: 3864MB, 512 bytes/sector, 7913472 sectors error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A sd1 detached scsibus5 detached umass0 detached error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa ilure on pipe A error: [drm:pid13414:intel_pipe_update_start] *ERROR* Potential atomic update fa Hi jggimi, thank you for the answer. There is an error at the beginning of the file, but I checked the file /etc/sysctl.conf, but id does not exist. Code:
[ 89.156] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem (Operation not permitted) Check that you have set 'machdep.allowaperture=1' in /etc/sysctl.conf and reboot your machine refer to xf86(4) for details [ 89.156] linear framebuffer access unavailable [ 89.221] (--) Using wscons driver on /dev/ttyC4 [ 89.274] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 89.274] X Protocol Version 11, Revision 0 [ 89.274] Build Operating System: OpenBSD 6.3 amd64 [ 89.274] Current Operating System: OpenBSD dracula.localhost 6.3 GENERIC.MP# 3 amd64 [ 89.274] Build Date: 24 March 2018 02:38:24PM [ 89.274] [ 89.274] Current version of pixman: 0.34.0 [ 89.274] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 89.274] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 89.274] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 05:45:15 2018 [ 89.302] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 89.303] (==) No Layout section. Using the first Screen section. [ 89.303] (==) No screen section available. Using defaults. [ 89.303] (**) |-->Screen "Default Screen Section" (0) [ 89.304] (**) | |-->Monitor "<default monitor>" [ 89.305] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 89.305] (==) Automatically adding devices [ 89.305] (==) Automatically enabling devices [ 89.305] (==) Not automatically adding GPU devices [ 89.309] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 89.456] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 89.456] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 89.456] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 89.465] (II) Loader magic: 0x84669042000 [ 89.465] (II) Module ABI versions: [ 89.465] X.Org ANSI C Emulation: 0.4 [ 89.465] X.Org Video Driver: 23.0 [ 89.465] X.Org XInput driver : 24.1 [ 89.465] X.Org Server Extension : 10.0 [ 89.467] (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 rev 12, Mem @ 0xf8100000/1048576, 0xe000000 0/268435456, I/O @ 0x00001800/8 [ 89.467] (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 rev 12, Mem @ 0xf8200000/1048576 [ 89.467] (II) LoadModule: "glx" [ 89.505] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 89.769] (II) Module glx: vendor="X.Org Foundation" [ 89.769] compiled for 1.19.6, module version = 1.0.0 [ 89.769] ABI class: X.Org Server Extension, version 10.0 [ 89.783] (==) Matched modesetting as autoconfigured driver 0 [ 89.783] (==) Assigned the driver to the xf86ConfigLayout [ 89.783] (II) LoadModule: "modesetting" [ 89.785] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so [ 89.793] (II) Module modesetting: vendor="X.Org Foundation" [ 89.793] compiled for 1.19.6, module version = 1.19.6 [ 89.793] Module class: X.Org Video Driver [ 89.793] ABI class: X.Org Video Driver, version 23.0 [ 89.793] (II) modesetting: Driver for Modesetting Kernel Drivers: kms 89.795] (**) modeset(0): claimed PCI slot 0@0:2:0 [ 89.795] (II) modeset(0): using default device [ 89.796] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 89.796] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 89.797] (==) modeset(0): RGB weight 888 [ 89.797] (==) modeset(0): Default visual is TrueColor [ 89.797] (II) Loading sub module "glamoregl" [ 89.797] (II) LoadModule: "glamoregl" [ 89.864] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so [ 89.957] (II) Module glamoregl: vendor="X.Org Foundation" [ 89.957] compiled for 1.19.6, module version = 1.0.0 [ 89.957] ABI class: X.Org ANSI C Emulation, version 0.4 [ 89.957] (II) glamor: OpenGL accelerated X.org driver based. [ 90.272] (II) glamor: EGL version 1.4 (DRI2): [ 90.408] (II) modeset(0): glamor initialized [ 90.408] (II) modeset(0): Output LVDS-1 has no monitor section [ 90.431] (II) modeset(0): Output VGA-1 has no monitor section [ 90.866] (II) modeset(0): Output SVIDEO-1 has no monitor section [ 90.885] (II) modeset(0): EDID for output LVDS-1 [ 90.885] (II) modeset(0): Manufacturer: LEN Model: 4050 Serial#: 0 [ 90.885] (II) modeset(0): Year: 2006 Week: 0 [ 90.885] (II) modeset(0): Digital Display Input [ 90.885] (II) modeset(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 90.885] (II) modeset(0): Gamma: 2.20 [ 90.885] (II) modeset(0): DPMS capabilities: StandBy Suspend Off [ 90.885] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 90.885] (II) modeset(0): First detailed timing is preferred mode [ 90.885] (II) modeset(0): redX: 0.590 redY: 0.340 greenX: 0.320 greenY: 0.550 [ 90.885] (II) modeset(0): blueX: 0.152 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 [ 90.885] (II) modeset(0): Manufacturer's mask: 0 [ 90.885] (II) modeset(0): Supported detailed timing: [ 90.885] (II) modeset(0): clock: 71.1 MHz Image Size: 331 x 207 mm [ 90.885] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_b order: 0 [ 90.885] (II) modeset(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_borde r: 0 [ 90.885] (II) modeset(0): Supported detailed timing: [ 90.885] (II) modeset(0): clock: 59.3 MHz Image Size: 331 x 207 mm [ 90.885] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_b order: 0 [ 90.885] (II) modeset(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_borde r: 0 [ 90.885] (II) modeset(0): Unknown vendor-specific block f [ 90.885] (II) modeset(0): LTN154X3-L02 [ 90.885] (II) modeset(0): EDID (in hex): [ 90.885] (II) modeset(0): 00ffffffffffff0030ae504000000000 [ 90.885] (II) modeset(0): 0010010380211578ea03159757528c27 [ 90.885] (II) modeset(0): 21505400000001010101010101010101 [ 90.885] (II) modeset(0): 010101010101c71b00a0502017303020 [ 90.885] (II) modeset(0): 36004bcf10000019261700a050201730 [ 90.885] (II) modeset(0): 302036004bcf100000190000000f0081 [ 90.885] (II) modeset(0): 0a32810a281401004ca35833000000fe [ 90.885] (II) modeset(0): 004c544e31353458332d4c30320a0029 [ 90.886] (II) modeset(0): Printing probed modes for output LVDS-1 [ 90.886] (II) modeset(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz eP) [ 90.886] (II) modeset(0): Modeline "1280x800"x50.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz e) [ 90.886] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 77 0 794 doublescan -hsync +vsync (95.3 kHz d) [ 90.886] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 90.886] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 90.886] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 7 19 doublescan -hsync +vsync (86.4 kHz d) [ 90.886] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 6 97 doublescan -hsync +vsync (83.7 kHz d) [ 90.886] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 62 5 doublescan +hsync +vsync (75.0 kHz d) [ 90.886] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 90.886] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 90.886] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 90.886] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 90.886] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 90.886] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 90.886] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 90.886] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 90.886] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 [ 90.886] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 90.911] (II) modeset(0): EDID for output VGA-1 [ 91.341] (II) modeset(0): EDID for output SVIDEO-1 [ 91.341] (II) modeset(0): Output LVDS-1 connected [ 91.341] (II) modeset(0): Output VGA-1 disconnected [ 91.342] (II) modeset(0): Output SVIDEO-1 disconnected [ 91.342] (II) modeset(0): Using exact sizes for initial modes [ 91.342] (II) modeset(0): Output LVDS-1 using initial mode 1280x800 +0+0 [ 91.342] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 91.342] (==) modeset(0): DPI set to (96, 96) [ 91.342] (II) Loading sub module "fb" [ 91.342] (II) LoadModule: "fb" [ 91.345] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 91.393] (II) Module fb: vendor="X.Org Foundation" [ 91.393] compiled for 1.19.6, module version = 1.0.0 [ 91.393] ABI class: X.Org ANSI C Emulation, version 0.4 [ 91.393] (==) Depth 24 pixmap format is 32 bpp [ 92.269] (==) modeset(0): Backing store enabled [ 92.269] (==) modeset(0): Silken mouse enabled [ 92.283] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 92.312] (==) modeset(0): DPMS enabled [ 92.313] (WW) modeset(0): DRI2: glamor lacks support for pixmap import/export [ 92.313] (II) modeset(0): [DRI2] Setup complete [ 92.313] (II) modeset(0): [DRI2] DRI driver: i965 [ 92.313] (II) modeset(0): [DRI2] VDPAU driver: i965 [ 92.313] (--) RandR disabled [ 92.392] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 92.392] (II) AIGLX: enabled GLX_ARB_create_context [ 92.392] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 92.392] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 92.392] (II) AIGLX: enabled GLX_INTEL_swap_event [ 92.392] (II) AIGLX: enabled GLX_SGI_swap_control [ 92.392] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 92.392] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 92.393] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 92.393] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 92.398] (II) AIGLX: Loaded and initialized i965 [ 92.398] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 92.512] (II) modeset(0): Damage tracking initialized [ 92.512] (II) modeset(0): Setting screen physical size to 338 x 211 [ 93.747] (II) config/wscons: checking input device /dev/wskbd [ 93.747] (II) wskbd: using layout us [ 93.747] (II) LoadModule: "kbd" [ 93.750] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 93.771] (II) Module kbd: vendor="X.Org Foundation" [ 93.771] compiled for 1.19.6, module version = 1.9.0 [ 93.771] Module class: X.Org XInput Driver [ 93.771] ABI class: X.Org XInput driver, version 24.1 [ 93.771] (II) Using input driver 'kbd' for '/dev/wskbd' [ 93.771] (**) /dev/wskbd: always reports core events [ 93.771] (**) /dev/wskbd: always reports core events [ 93.771] (**) Option "Protocol" "standard" [ 93.772] (**) Option "XkbRules" "base" [ 93.772] (**) Option "XkbModel" "pc105" [ 93.772] (**) Option "XkbLayout" "us" [ 93.772] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 94.347] (II) config/wscons: checking input device /dev/wsmouse0 [ 94.347] (II) LoadModule: "ws" [ 94.350] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 94.367] (II) Module ws: vendor="X.Org Foundation" [ 94.367] compiled for 1.19.6, module version = 1.3.0 [ 94.367] Module class: X.Org XInput Driver [ 94.367] ABI class: X.Org XInput driver, version 24.1 [ 94.[ 94.367] (**) /dev/wsmouse0: always reports core events [ 94.367] (II) ws: /dev/wsmouse0: debuglevel 0 [ 94.367] (**) Option "Device" "/dev/wsmouse0" [ 94.367] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5 [ 94.368] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7 [ 94.368] (**) ws: /dev/wsmouse0: associated screen: 0 [ 94.913] (II) ws: /dev/wsmouse0: minimum x position: 0 [ 94.913] (II) ws: /dev/wsmouse0: maximum x position: 1279 [ 94.913] (II) ws: /dev/wsmouse0: minimum y position: 0 [ 94.913] (II) ws: /dev/wsmouse0: maximum y position: 799 [ 94.913] (==) ws: /dev/wsmouse0: Buttons: 7 [ 94.932] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5 [ 94.932] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: MOUSE, id 7) [ 95.477] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1 [ 95.477] (**) /dev/wsmouse0: (accel) acceleration profile 0 [ 95.477] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000 [ 95.477] (**) /dev/wsmouse0: (accel) acceleration threshold: 4 [ 95.510] (II) config/wscons: checking input device /dev/wsmouse [ 95.510] (II) Using input driver 'ws' for '/dev/wsmouse' [ 95.510] (**) /dev/wsmouse: always reports core events [ 95.510] (II) ws: /dev/wsmouse: debuglevel 0 [ 95.510] (**) Option "Device" "/dev/wsmouse" [ 95.511] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 95.511] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 95.511] (**) ws: /dev/wsmouse: associated screen: 0 [ 95.511] (II) ws: /dev/wsmouse: minimum x position: 0 [ 95.511] (II) ws: /dev/wsmouse: maximum x position: 1279 [ 95.511] (II) ws: /dev/wsmouse: minimum y position: 0 [ 95.511] (II) ws: /dev/wsmouse: maximum y position: 799 [ 95.511] (==) ws: /dev/wsmouse: Buttons: 7 [ 95.550] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 95.550] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8) [ 95.551] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 95.551] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 95.551] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 95.551] (**) /dev/wsmouse: (accel) acceleration threshold: 4 Kindest regards, M |
|
||||
Quote:
# echo machdep.allowaperture=1 >> /etc/sysctl.conf (A single > would suffice if you're certain the file doesn't exist.) |
|
||||
You should not need to enable the xf86(4) aperture driver, as you are not using isa(4) or pci(4) video cards. You are using the modesetting(4) driver in X with glamor 2D acceleration, via the inteldrm(4) kernel driver.
One option would be to attempt to use the older intel(4) driver in place of the default modesetting(4) driver. You could create a temporary test configuration file in /etc/X11/xorg.conf.d/ with a simple test configuration fragment such as: Code:
Section "Device" Identifier "video" Driver "intel" EndSection |
|
||||
I have taken the time to find the source of the message. It is, indeed, from inteldrm(4), in /usr/src/sys/dev/pci/drm/i915/intel_sprite.c. The error message was added as part of revision 1.8 to this module. The log message states:
Code:
revision 1.8 date: 2017/07/01 16:14:10; author: kettenis; state: Exp; lines: +594 -588; commitid: KnwRPOZok9A30HI4; Update inteldrm(4) to code based on Linux 4.4.70. This brings us support for Skylake and Cherryview and better support for Broadwell and Valleyview. Also adds MST support. Some tweaks to the TTM code and radeondrm(4) to keep it working with the updated generic DRM code needed for inteldrm(4). |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Xorg segment error | sw2wolf | OpenBSD Packages and Ports | 2 | 21st January 2015 12:43 AM |
Network Speed Issues - Not ISP Related | EverydayDiesel | OpenBSD General | 41 | 23rd December 2013 11:14 PM |
Xorg-7.4_2 build error | FreeBee | FreeBSD Ports and Packages | 7 | 11th January 2010 09:02 PM |
Yahoo! related Pidgin problems... | BSDfan666 | General software and network | 10 | 28th September 2008 02:39 AM |
OpenBSD-related websites | bienc | OpenBSD General | 7 | 12th May 2008 09:15 PM |