DaemonForums  

Go Back   DaemonForums > Other Operating Systems > Other BSD and UNIX/UNIX-like

Other BSD and UNIX/UNIX-like Any other flavour of BSD or UNIX that does not have a section of its own.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 30th September 2024
Nixota Nixota is offline
Port Guard
 
Join Date: Aug 2022
Posts: 15
Default [CRITICAL] zfs pool in DEGRADED condition: how to solve it?

Hello Savvy Admins/Devs,

using OpenZFS filie system on OSX (from https://openzfsonosx.org)

SYSTEM CONFIGS:
I'm having a very difficult situation with an open-zfs data pool (mirrored in two/two partitions, for a total of 4 discs) on an external NAS, with #4 size 3.5 inch mechanical hard disks (Seagate pro quality), driven by a macOS vs. 10.15 (Catalina), with ZFS vs. zfs-macOS-2.2.3-rc4.

PROBLEM:
After a first crash (with a few data errors) whose zpool output was (read the OpenZFS message at https://openzfs.github.io/openzfs-do...-HC/index.html), resulting in a 'REMOVED' state for the partition from the 2nd mirror (mirror-1, prt 1/2), and an overall 'SUSPENDED' state for the pool,

INITIAL SOLUTION ATTEMPT:
that got temporarily resolved with (CLI commands):

$ sudo zpool online [poolName] mirror-1
(reboot of the OS)
$ sudo zpool clear [poolName]

After another reboot, Initially the pool was 'ONLINE' and accessible, [SEE the attached image] and ZFS started a data resilvering process. But then, all of a sudden it seems that the resilvering process stops and all the I/O commands get hanging with no possibility to proceed further, resulting in a 'mirror-1' partition in 'REMOVED' state, and a final 'DEGRADED' status for the pool.

I tried more than 10 reboots +'online' the 'mirror-1' + 'clear' the pool and wait for the resilvering process to finish, but to no avail: all the times the pool is initially accessible but soon the resilvering process stops and the I/O hangs indefinitely.

The final resulting state of the pool is shown in the attached image.

SOLUTION?
I might (superficially) guess that one of the hard drives (the one tagged as 'mirror-1 media-etc') is a faulty unit and crashes unexpectedly during the resilvering process; probably should substitute that with a new hard disk and resilver it with the $ zpool replace command?

HELP
I kindly ask for your expertise and help, I'm unable to proceed and I'm worrying very much for the data.

Thank you in advance, with Best Regards
Attached Images
File Type: png pool-DEGRADED-status-resilvering-does-NOT-ent.png (103.7 KB, 39 views)
Reply With Quote
  #2   (View Single Post)  
Old 1st October 2024
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 4,164
Default

There are not any ZFS experts here. Many years ago, I played with ZFS for a while.

You figured out the remedy already and that is to remove that troublesome mirror-1 disks and replace it with a new one.

Another option, that assumes that mirror-0 is OK , is to remove or disable mirror-1 from the pool and use "zfs send" to copy the mirror-0 pool data to a single big (TB's) disk. Then you will have another copy of your data.
That TB disks could be a USB 3.0 or 3.1 portable one. What I remember is that "zfs send" is quite flexible in the choice of the destination disk. It also could be on your network or in another free slot of your NAS.
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #3   (View Single Post)  
Old 1st October 2024
Nixota Nixota is offline
Port Guard
 
Join Date: Aug 2022
Posts: 15
Default Thank you for the suggestions

Hello 'J65nko'

thank you very much for your detailed info. I am collecting as much technical details as possible so to be able to perform data recovery + disk resilvering, in the correct way.

For the sake of general information: hard disk producers, when dealing with high quality disks covered by warranty, have a Data Recovery Plan in place, so that for difficult data recovery operations they are set up with all that's needed.

Let's hope for the best!

with Best Regards
Reply With Quote
  #4   (View Single Post)  
Old 1st October 2024
J65nko J65nko is offline
Administrator
 
Join Date: May 2008
Location: Budel - the Netherlands
Posts: 4,164
Default

It is quite common that during resilvering another disks in the array or pool dies. I strongly advise to use 'zfs send' to copy the data from your now still working mirror-0 to another disk. Do not rely on a external Data Recovery Plan ;-)

BTW Reddit has a ZFS subreddit: https://www.reddit.com/r/zfs/
__________________
You don't need to be a genius to debug a pf.conf firewall ruleset, you just need the guts to run tcpdump
Reply With Quote
  #5   (View Single Post)  
Old 4 Weeks Ago
Nixota Nixota is offline
Port Guard
 
Join Date: Aug 2022
Posts: 15
Thumbs up OK, checked that.

Hello 'J65nko''

sure, I am following your suggestions. I already performed a thorough backup from the working mirror-0 and I will try to resilver the other mirror-1 with another HD in substitution of the faulty one.

Thanks again for the precious help, with Best Regards
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slow rsync backup from zfs pool with 99% of files Septic FreeBSD General 10 29th May 2013 09:45 PM
FreeBSD 8.1/7.3 vm.pmap kernel local race condition bryn1u FreeBSD Security 0 7th September 2010 08:12 PM
update-fetch(how to solve)... vato FreeBSD Installation and Upgrading 4 6th September 2010 08:00 AM
IPv4 Free Pool Drops Below 10%, 1.0.0.0/8 Allocated J65nko News 4 29th January 2010 12:13 PM
Moving ZFS to a other pool? amscotti Solaris 1 28th July 2009 11:49 PM


All times are GMT. The time now is 10:17 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick