Memory Not Detected

[jrs]

Installed OpenBSD 4.5 (AMD64) on new Dell Poweredge r300 server with 24GB memory. Only 2GB is beign detected. How do I tell Open BSD about the other 22GB?

I assume I need to use AMD64 as i386 will be limited to 4GB RAM?

Dmesg
------

OpenBSD 4.5 (GENERIC.MP) #2133: Sat Feb 28 15:02:16 MST 2009
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 2140798976 (2041MB)
avail mem = 2066849792 (1971MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7fb9c000 (55 entries)
bios0: vendor Dell Inc. version "1.3.0" date 08/15/2008
bios0: Dell Inc. PowerEdge R300
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3113 @ 3.00GHz, 3000.39 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 333MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3113 @ 3.00GHz, 3000.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (PEX4)
acpiprt2 at acpi0: bus 7 (PEX6)
acpiprt3 at acpi0: bus 1 (SBE4)
acpiprt4 at acpi0: bus 2 (SBE5)
acpiprt5 at acpi0: bus 10 (COMP)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 5100 Host" rev 0x90
ppb0 at pci0 dev 2 function 0 "Intel 5100 PCIE" rev 0x90
pci1 at ppb0 bus 3
ppb1 at pci0 dev 3 function 0 "Intel 5100 PCIE" rev 0x90
pci2 at ppb1 bus 4
ppb2 at pci0 dev 4 function 0 "Intel 5100 PCIE" rev 0x90: apic 2 int 16 (irq 0)
pci3 at ppb2 bus 5
mpi0 at pci3 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic 2 int 16 (irq 15)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 476416MB, 512 bytes/sec, 975699968 sec total
ses0 at scsibus0 targ 8 lun 0: <DP, BACKPLANE, 1.05> SCSI3 13/enclosure services fixed
ppb3 at pci0 dev 5 function 0 "Intel 5100 PCIE" rev 0x90
pci4 at ppb3 bus 6
ppb4 at pci0 dev 6 function 0 "Intel 5100 PCIE" rev 0x90: apic 2 int 16 (irq 0)
pci5 at ppb4 bus 7
ppb5 at pci0 dev 7 function 0 "Intel 5100 PCIE" rev 0x90
pci6 at ppb5 bus 8
pchb1 at pci0 dev 16 function 0 "Intel 5100 FSB" rev 0x90
pchb2 at pci0 dev 16 function 1 "Intel 5100 FSB" rev 0x90
pchb3 at pci0 dev 16 function 2 "Intel 5100 FSB" rev 0x90
pchb4 at pci0 dev 17 function 0 "Intel 5100 Reserved" rev 0x90
pchb5 at pci0 dev 19 function 0 "Intel 5100 Reserved" rev 0x90
pchb6 at pci0 dev 21 function 0 "Intel 5100 DDR" rev 0x90
pchb7 at pci0 dev 22 function 0 "Intel 5100 DDR" rev 0x90
ppb6 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02
pci7 at ppb6 bus 9
ppb7 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02
pci8 at ppb7 bus 1
bge0 at pci8 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0 (0xa200): apic 2 int 16 (irq 15), address 00:22:19:cd:0e
:14
brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
ppb8 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02
pci9 at ppb8 bus 2
bge1 at pci9 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0 (0xa200): apic 2 int 17 (irq 14), address 00:22:19:cd:0e
:15
brgphy1 at bge1 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 20 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb9 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci10 at ppb9 bus 10
vga1 at pci10 dev 7 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 19 (irq 6)
drm0 at radeondrm0
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide0: using apic 2 int 23 (irq 6) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A103> ATAPI 5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4
pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-
PCI
pciide1: using apic 2 int 22 (irq 5) for native-PCI interrupt
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub4 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/90.15 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Dell Dell QuietKey Keyboard" rev 1.10/1.55 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b