|
OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Problem with pptp
Hi! I've Openbsd 4.4 with default kernel and connection to Internet by pptp. Problem is sometimes it connects but sometimes doesn't. But in most cases when it connects it pings any host with message:
ping: sendto: No buffer space available ping: wrote ya.ru 64 chars, ret=-1 Here some files: 1. hostname.fxp0 dhcp NONE NONE NONE !route add -host vpn.provider.net 10.129.0.17 !route add 85.21/16 10.129.0.17 !route add 195.14.32/19 10.129.0.17 !route add 10/8 10.129.0.17 2. hostname.tun0 !/usr/sbin/ppp -ddial corbina >/dev/null 2>&1 3. ppp.conf default: set log Phase Chat LCP IPCP CCP tun command disable ipv6cp corbina: set device "!/usr/sbin/pptp vpn.provider.net --nolaunchpppd" set timeout 0 set authname <login> set authkey <password> set login set ifaddr 85.81.225.18 10.129.0.17/0 add! default HISADDR 4. /var/log/daemon Jan 20 23:29:48 gullabs ppp[17136]: tun0: Chat: deflink: Redial timer expired. Jan 20 23:29:48 gullabs ppp[17136]: tun0: Phase: deflink: Connected! Jan 20 23:29:48 gullabs ppp[17136]: tun0: Phase: deflink: opening -> dial Jan 20 23:29:48 gullabs ppp[17136]: tun0: Phase: deflink: dial -> carrier Jan 20 23:29:48 gullabs ppp[17136]: tun0: Phase: deflink: carrier -> login Jan 20 23:29:48 gullabs ppp[17136]: tun0: Phase: deflink: login -> lcp Jan 20 23:29:48 gullabs ppp[17136]: tun0: LCP: FSM: Using "deflink" as a transport Jan 20 23:29:48 gullabs ppp[17136]: tun0: LCP: deflink: State change Initial --> Closed Jan 20 23:29:48 gullabs ppp[17136]: tun0: LCP: deflink: State change Closed --> Stopped Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: deflink: LayerStart Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: deflink: SendConfigReq(22) state = Stopped Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: ACFCOMP[2] Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: PROTOCOMP[2] Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: MRU[4] 1500 Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: MAGICNUM[6] 0x02bcea78 Jan 20 23:29:49 gullabs ppp[17136]: tun0: LCP: deflink: State change Stopped --> Req-Sent Jan 20 23:29:52 gullabs ppp[17136]: tun0: LCP: deflink: SendConfigReq(22) state = Req-Sent Jan 20 23:29:52 gullabs ppp[17136]: tun0: LCP: ACFCOMP[2] Jan 20 23:29:52 gullabs ppp[17136]: tun0: LCP: PROTOCOMP[2] Jan 20 23:29:52 gullabs ppp[17136]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 20 23:29:52 gullabs ppp[17136]: tun0: LCP: MRU[4] 1500 Jan 20 23:29:52 gullabs ppp[17136]: tun0: LCP: MAGICNUM[6] 0x02bcea78 Jan 20 23:29:55 gullabs ppp[17136]: tun0: LCP: deflink: SendConfigReq(22) state = Req-Sent Jan 20 23:29:55 gullabs ppp[17136]: tun0: LCP: ACFCOMP[2] Jan 20 23:29:55 gullabs ppp[17136]: tun0: LCP: PROTOCOMP[2] Jan 20 23:29:55 gullabs ppp[17136]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 20 23:29:55 gullabs ppp[17136]: tun0: LCP: MRU[4] 1500 Jan 20 23:29:55 gullabs ppp[17136]: tun0: LCP: MAGICNUM[6] 0x02bcea78 Jan 20 23:29:58 gullabs ppp[17136]: tun0: LCP: deflink: SendConfigReq(22) state = Req-Sent Jan 20 23:29:58 gullabs ppp[17136]: tun0: LCP: ACFCOMP[2] Jan 20 23:29:58 gullabs ppp[17136]: tun0: LCP: PROTOCOMP[2] Jan 20 23:29:58 gullabs ppp[17136]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 20 23:29:58 gullabs ppp[17136]: tun0: LCP: MRU[4] 1500 Jan 20 23:29:58 gullabs ppp[17136]: tun0: LCP: MAGICNUM[6] 0x02bcea78 Jan 20 23:30:01 gullabs ppp[17136]: tun0: LCP: deflink: SendConfigReq(22) state = Req-Sent Jan 20 23:30:01 gullabs ppp[17136]: tun0: LCP: ACFCOMP[2] Jan 20 23:30:01 gullabs ppp[17136]: tun0: LCP: PROTOCOMP[2] Jan 20 23:30:01 gullabs ppp[17136]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 20 23:30:01 gullabs ppp[17136]: tun0: LCP: MRU[4] 1500 Jan 20 23:30:01 gullabs ppp[17136]: tun0: LCP: MAGICNUM[6] 0x02bcea78 Jan 20 23:30:04 gullabs ppp[17136]: tun0: LCP: deflink: LayerFinish Jan 20 23:30:04 gullabs ppp[17136]: tun0: LCP: deflink: State change Req-Sent --> Stopped Jan 20 23:30:04 gullabs ppp[17136]: tun0: LCP: deflink: State change Stopped --> Closed Jan 20 23:30:04 gullabs ppp[17136]: tun0: LCP: deflink: State change Closed --> Initial Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: Disconnected! Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: lcp -> logout Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: logout -> hangup Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: Disconnected! Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: Connect time: 16 secs: 0 octets in, 270 octets out Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: 102 packets in, 3629 packets out Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: total 16 bytes/sec, peak 21 bytes/sec on Tue Jan 20 23:29:52 2009 Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: HUPing 25768 Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: hangup -> opening Jan 20 23:30:04 gullabs ppp[17136]: tun0: Phase: deflink: Enter pause (3) for redialing. and when I can't connect daemon log is like: Jan 21 02:50:26 gullabs ppp[7913]: tun0: LCP: deflink: RecvEchoRequest(139) state = Opened Jan 21 02:50:26 gullabs ppp[7913]: tun0: LCP: deflink: SendEchoReply(139) state = Opened Jan 21 02:50:27 gullabs ppp[7913]: tun0: IPCP: deflink: Error: Unexpected IPCP in phase Authenticate (ignored) Jan 21 02:50:35 gullabs last message repeated 4 times Jan 21 02:50:36 gullabs ppp[7913]: tun0: LCP: deflink: RecvEchoRequest(140) state = Opened Jan 21 02:50:36 gullabs ppp[7913]: tun0: LCP: deflink: SendEchoReply(140) state = Opened Jan 21 02:50:46 gullabs ppp[7913]: tun0: LCP: deflink: RecvEchoRequest(141) state = Opened Jan 21 02:50:46 gullabs ppp[7913]: tun0: LCP: deflink: SendEchoReply(141) state = Opened Jan 21 02:50:56 gullabs ppp[7913]: tun0: LCP: deflink: RecvEchoRequest(142) state = Opened Jan 21 02:50:56 gullabs ppp[7913]: tun0: LCP: deflink: SendEchoReply(142) state = Opened Jan 21 02:50:57 gullabs ppp[7913]: tun0: IPCP: deflink: Error: Unexpected IPCP in phase Authenticate (ignored) Jan 21 02:51:05 gullabs last message repeated 4 times |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GRE throught OpenBSD 4.5 to 2K3 PPTP vpn | There0 | OpenBSD General | 3 | 10th September 2009 12:54 PM |
Boot problem. Geometry problem? | gulanito | FreeBSD Installation and Upgrading | 0 | 3rd July 2009 03:03 AM |
PPTP Server, no internet connectivity (routing between interfaces?) | godfrank | FreeBSD Ports and Packages | 5 | 15th April 2009 04:44 PM |