|
General software and network General OS-independent software and network questions, X11, MTA, routing, etc. |
|
Thread Tools | Display Modes |
|
|||
httpd.conf
Hey I messed it up it was working and then I changed several things and now I can not access. I get Forbidden (403) Error all the time.
Here is my configuration Code:
# # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/foo_log" # with ServerRoot set to "/usr/local" will be interpreted by the # server as "/usr/local//var/log/foo_log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/usr/local" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module libexec/apache22/mod_authn_file.so LoadModule authn_dbm_module libexec/apache22/mod_authn_dbm.so LoadModule authn_anon_module libexec/apache22/mod_authn_anon.so LoadModule authn_default_module libexec/apache22/mod_authn_default.so LoadModule authn_alias_module libexec/apache22/mod_authn_alias.so LoadModule authz_host_module libexec/apache22/mod_authz_host.so LoadModule authz_groupfile_module libexec/apache22/mod_authz_groupfile.so LoadModule authz_user_module libexec/apache22/mod_authz_user.so LoadModule authz_dbm_module libexec/apache22/mod_authz_dbm.so LoadModule authz_owner_module libexec/apache22/mod_authz_owner.so LoadModule authz_default_module libexec/apache22/mod_authz_default.so LoadModule auth_basic_module libexec/apache22/mod_auth_basic.so LoadModule auth_digest_module libexec/apache22/mod_auth_digest.so LoadModule file_cache_module libexec/apache22/mod_file_cache.so LoadModule cache_module libexec/apache22/mod_cache.so LoadModule disk_cache_module libexec/apache22/mod_disk_cache.so LoadModule dumpio_module libexec/apache22/mod_dumpio.so LoadModule include_module libexec/apache22/mod_include.so LoadModule filter_module libexec/apache22/mod_filter.so LoadModule charset_lite_module libexec/apache22/mod_charset_lite.so LoadModule deflate_module libexec/apache22/mod_deflate.so LoadModule log_config_module libexec/apache22/mod_log_config.so LoadModule logio_module libexec/apache22/mod_logio.so LoadModule env_module libexec/apache22/mod_env.so LoadModule mime_magic_module libexec/apache22/mod_mime_magic.so LoadModule cern_meta_module libexec/apache22/mod_cern_meta.so LoadModule expires_module libexec/apache22/mod_expires.so LoadModule headers_module libexec/apache22/mod_headers.so LoadModule usertrack_module libexec/apache22/mod_usertrack.so LoadModule unique_id_module libexec/apache22/mod_unique_id.so LoadModule setenvif_module libexec/apache22/mod_setenvif.so LoadModule version_module libexec/apache22/mod_version.so LoadModule ssl_module libexec/apache22/mod_ssl.so LoadModule mime_module libexec/apache22/mod_mime.so LoadModule dav_module libexec/apache22/mod_dav.so LoadModule status_module libexec/apache22/mod_status.so LoadModule autoindex_module libexec/apache22/mod_autoindex.so LoadModule asis_module libexec/apache22/mod_asis.so LoadModule info_module libexec/apache22/mod_info.so LoadModule cgi_module libexec/apache22/mod_cgi.so LoadModule dav_fs_module libexec/apache22/mod_dav_fs.so LoadModule vhost_alias_module libexec/apache22/mod_vhost_alias.so LoadModule negotiation_module libexec/apache22/mod_negotiation.so LoadModule dir_module libexec/apache22/mod_dir.so LoadModule imagemap_module libexec/apache22/mod_imagemap.so LoadModule actions_module libexec/apache22/mod_actions.so LoadModule speling_module libexec/apache22/mod_speling.so LoadModule userdir_module libexec/apache22/mod_userdir.so LoadModule alias_module libexec/apache22/mod_alias.so LoadModule rewrite_module libexec/apache22/mod_rewrite.so LoadModule fcgid_module libexec/apache22/mod_fcgid.so <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi </IfModule> <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User www Group www </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # ServerAdmin snoop1990@gmx.net # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/home/web/public_html" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> AllowOverride None Options FollowSymLinks </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/home/web/public_html"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks SetHandler fcgid-script Options ExecCGI # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "/var/log/httpd-error.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog "/var/log/httpd-access.log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # CustomLog "/var/log/httpd-access.log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/usr/local/www/apache22/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock /var/run/cgisock </IfModule> # # "/usr/local/www/apache22/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/home/web/public_html"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/apache22/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/apache22/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the etc/apache22/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include etc/apache22/extra/httpd-mpm.conf # Multi-language error messages #Include etc/apache22/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include etc/apache22/extra/httpd-autoindex.conf # Language settings #Include etc/apache22/extra/httpd-languages.conf # User home directories #Include etc/apache22/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include etc/apache22/extra/httpd-info.conf # Virtual hosts #Include etc/apache22/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include etc/apache22/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include etc/apache22/extra/httpd-dav.conf # Various default settings #Include etc/apache22/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include etc/apache22/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include etc/apache22/Includes/*.conf
__________________
Regards Snoop1990 Snoop1990.co.cc ( the geeky inside of an usual boy ) my own small forum:pro-connect.co.cc
|
|
|||
This site is working: http://pulsartest.game-host.org:88
and so does this one: http://78.142.42.42/ What site is giving you the 403? |
|
|||
you tested my configuration ?
__________________
Regards Snoop1990 Snoop1990.co.cc ( the geeky inside of an usual boy ) my own small forum:pro-connect.co.cc
|
|
|||
I donot know how the previous chap got your website details. Nothing in the httpd.conf to tell us your sites.
change Code:
SetHandler fcgid-script Code:
AddHandler fcgid-script .php
__________________
Freebsd 7 64 bit apache2.2 php5 mysql5 |
|
|||
it is not my website after all I am doing this for a small personal project, nothing available to the public (for the moment).
__________________
Regards Snoop1990 Snoop1990.co.cc ( the geeky inside of an usual boy ) my own small forum:pro-connect.co.cc
|
|
|||
Did what I suggest work
__________________
Freebsd 7 64 bit apache2.2 php5 mysql5 |
Tags |
error 403, httpd.conf |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
httpd problem or something else | c0mrade | Other BSD and UNIX/UNIX-like | 6 | 15th January 2009 09:19 PM |
Update httpd.conf IPs from DNS zones. | bigb89 | Programming | 16 | 2nd December 2008 02:02 AM |
Apache : httpd could not be started | lalebarde | General software and network | 13 | 13th November 2008 11:51 PM |
difference between rc.conf and loader.conf | disappearedng | FreeBSD General | 5 | 3rd September 2008 05:54 AM |
httpd -DNOHTTPACCEPT | starbuck | FreeBSD General | 9 | 23rd August 2008 12:14 PM |