httpd(8) and php-fpm no dynamic content
Hello.
Could someone please help me to set up httpd(8) and php-fpm?
Code:
OpenBSD 5.8-current (GENERIC.MP) #1378: Thu Sep 24 20:47:17 MDT 2015
deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 510156800 (486MB)
avail mem = 490647552 (467MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (73 entries)
bios0: vendor Dell Inc. version "A03" date 08/05/2005
bios0: Dell Inc. OptiPlex GX620
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz, 2793.48 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=0, max=0 (bogus)
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 2.80GHz, 2793.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,NXE,LONG
cpu1: 1MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 4 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpibtn0 at acpi0: VBTN
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: apic 8 int 16, 1280x1024
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001): apic 8 int 16, address 00:12:3f:53:d0:ca
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 4
auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: apic 8 int 23, ICH7 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 20 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3250310CS>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
rum0 at uhub0 port 1 configuration 1 interface 0 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:24:01:60:db:b8
uhidev0 at uhub1 port 2 configuration 1 interface 0 "CHICONY HP Basic USB Keyboard" rev 1.10/3.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (b0fdfdb6049106bb.a) swap on wd0b dump on wd0b
Code:
# $OpenBSD: httpd.conf,v 1.14 2015/02/04 08:39:35 florian Exp $
#
# Macros
#
ext_addr="*"
#
# Global Options
#
# prefork 3
#
# Servers
#
# A minimal default server
server "default" {
listen on $ext_addr port 80
root "/htdocs/www"
# Logging is enabled by default, but it can be turned off per server
#no log
location "/*" {
directory auto index
# directory { index index.php index.html }
log style combined
}
location "*.php$" {
fastcgi socket "run/php-fpm.sock"
}
}
# Include MIME types instead of the built-in ones
types {
include "/usr/share/misc/mime.types"
}
- $ grep -e "^[^;]" /etc/php-fpm.conf # file is quite big...show me what's important
Code:
[global]
[www]
listen.owner = www
listen.group = www
listen.mode = 0660
user = www
listen = /var/www/run/php-fpm.sock
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
chroot = /var/www
- $ tail /var/log/php-fpm.log
Code:
[27-Sep-2015 15:13:37] NOTICE: Terminating ...
[27-Sep-2015 15:13:37] NOTICE: exiting, bye-bye!
[27-Sep-2015 15:13:38] NOTICE: fpm is running, pid 20304
[27-Sep-2015 15:13:38] NOTICE: ready to handle connections
[27-Sep-2015 15:25:52] NOTICE: Terminating ...
[27-Sep-2015 15:25:52] NOTICE: exiting, bye-bye!
[27-Sep-2015 15:25:53] ERROR: FPM initialization failed
[27-Sep-2015 15:26:25] NOTICE: fpm is running, pid 19341
[27-Sep-2015 15:26:25] NOTICE: ready to handle connections
What else could I provide to help? Thank you all for help in advance
Last edited by ocicat; 27th September 2015 at 06:03 PM.
Reason: Please use [code] & [/code] tags when posting console output.
|