DaemonForums  

Go Back   DaemonForums > FreeBSD > FreeBSD Installation and Upgrading

FreeBSD Installation and Upgrading Installing and upgrading FreeBSD.

Reply
 
Thread Tools Display Modes
  #1   (View Single Post)  
Old 3rd August 2008
Diceman Diceman is offline
New User
 
Join Date: Aug 2008
Posts: 7
Default FreeBSD 6.1, VMWare Server , and ESX

just saw what has happened to bsdforums.org. it's a shame.


Currently running a convulated mess of Freebsd 6.1B4 with a 6.1 Release kernel. i am running it as a virtual machine on vmware server 1.0.5 and it runs great. i am trying to migrate it to an esx server and the hard drive was not found. from what i could find on the net, 6.1 release should contain updated drivers that will let it work on esx, but if not 6.2 release will.

so here i am trying to upgrade to 6.2 release and not having any luck. while make buildworld is running i am getting random seg fault 11's on different modules each time. i decided to just try and move my entire system to 6.1 release since it is kind of a hybrid by accident. im getting the same thing with the 6.1 sources as well.

i did a little bit of research on seg fault 11 during large operations (kernel building, large packages, etc) it appears that it could most likely be a hardware fault, but that makes me wonder since it is virtual hardware. one would think that is the most stable type.

my question is, i have a 6.1 release machine that is on physical hardware and it appears that i was able to download the 6.2 sources and complete a make buildworld. could i nfs mount the /usr/src and /usr/obj diretories to my hybrid machine to make installworld with those sources, or is make buildworld only building modules for the system it was run on? both of the machines have most of the same software but not completely.

to try and troubleshoot why it was seg faulting i deleted /usr/obj and /usr/src and downloaded them fresh but it has done me no good thus far. i ran make buildworld roughly 10 times during my last few hours of work last night and i started a last one right before i left but i have no doubts that it failed.

thoughts?
Reply With Quote
  #2   (View Single Post)  
Old 3rd August 2008
vermaden's Avatar
vermaden vermaden is offline
Administrator
 
Join Date: Apr 2008
Location: pl_PL.lodz
Posts: 1,056
Default

Mayber just try other virtual machine for upgrade, VirtualBox/QEMU for example, then go back to your VMware server.
__________________
religions, worst damnation of mankind
"If 386BSD had been available when I started on Linux, Linux would probably never had happened." Linus Torvalds

Linux is not UNIX! Face it! It is not an insult. It is fact: GNU is a recursive acronym for “GNU's Not UNIX”.
vermaden's: links resources deviantart spreadbsd
Reply With Quote
  #3   (View Single Post)  
Old 3rd August 2008
phoenix's Avatar
phoenix phoenix is offline
Risen from the ashes
 
Join Date: May 2008
Posts: 696
Default

Yes, you can nfs mount /usr/src and /usr/obj into the VM and run installworld from there. This is the recommended way of doing source upgrades on multiple systems with similar hardware (build on one machine, install on many).

Signal 11 errors are sign of (usually) RAM issues. You should run memtest86 or memtest86+ or similar on the host hardware. It could also be signs of overheating CPU, or dying harddrive.
__________________
Freddie

Help for FreeBSD: Handbook, FAQ, man pages, mailing lists.
Reply With Quote
  #4   (View Single Post)  
Old 3rd August 2008
Diceman Diceman is offline
New User
 
Join Date: Aug 2008
Posts: 7
Default

Quote:
Originally Posted by phoenix View Post
Yes, you can nfs mount /usr/src and /usr/obj into the VM and run installworld from there. This is the recommended way of doing source upgrades on multiple systems with similar hardware (build on one machine, install on many).

Signal 11 errors are sign of (usually) RAM issues. You should run memtest86 or memtest86+ or similar on the host hardware. It could also be signs of overheating CPU, or dying harddrive.
awesome, i will give that a shot.

as far as the hardware, i moved this to a temporary piece of gear. it is a brand new in the box 1950. it has error checking ram and has done some significant workload since i started testing/preparing for this migration. i realize that new hardware could still be faulty, it just seems unlikely.

thanks for the answer on the sourcing. hopefully installworld will just complete and i can move on.

if not, im sure you guys will hear from me as i rebuild into a 6.2 or 6.3 VM on the ESX server.
Reply With Quote
  #5   (View Single Post)  
Old 3rd August 2008
anomie's Avatar
anomie anomie is offline
Local
 
Join Date: Apr 2008
Location: Texas
Posts: 445
Default

Quote:
Originally Posted by Diceman
Currently running a convulated mess of Freebsd 6.1B4 with a 6.1 Release kernel. i am running it as a virtual machine on vmware server 1.0.5 and it runs great. i am trying to migrate it to an esx server and the hard drive was not found.
This may sound strange (and the circumstances are certainly different than your own), but FWIW when I installed FBSD 6.3 as a vmware ESX guest, I was getting "drive not found" errors until I installed the FreeBSD Boot Manager.

I know you're migrating and not installing fresh, but the symptoms of your problem are similar enough that it caught my attention.

If, as a last ditch effort before a fresh install (and after you've taken good backups), you'd like to give this a try:

# sysinstall

Configure -> Fdisk -> Q (for quit) -> BootMgr

That should install the boot manager for you, or I believe you can use boot0cfg(8) instead.

Good luck.
__________________
Kill your t.v.
Reply With Quote
  #6   (View Single Post)  
Old 3rd August 2008
Diceman Diceman is offline
New User
 
Join Date: Aug 2008
Posts: 7
Default

Quote:
Originally Posted by anomie View Post
This may sound strange (and the circumstances are certainly different than your own), but FWIW when I installed FBSD 6.3 as a vmware ESX guest, I was getting "drive not found" errors until I installed the FreeBSD Boot Manager.

I know you're migrating and not installing fresh, but the symptoms of your problem are similar enough that it caught my attention.

If, as a last ditch effort before a fresh install (and after you've taken good backups), you'd like to give this a try:

# sysinstall

Configure -> Fdisk -> Q (for quit) -> BootMgr

That should install the boot manager for you, or I believe you can use boot0cfg(8) instead.

Good luck.
i know it has a boot manager in it. the problem is that 6.1B4 didnt have the proper scsi drivers to work inside ESX. 6.2 does. supposedly the code for 6.1 to work inside ESX has been "back ported" as far as 4.10 IIRC. thanks for the thought though.

currently working on extracting the 6.2 sources so i can build a kernel.

the nfs mount idea was utter failure, it kept giving me errors about the nfs server not responding fast enough or something like that. i just tar'd up the directories and scp'd them. we'll know soon enough.

so make buildkernel is also failing at random spots. i could probably sit here all night and not get it to work. im wondering if i just need to move this to a different physical server to see if that is causing the issue. problem being that physical servers dont grow on trees. *sigh*

make buildkernel is running through multiple "sections". is there any way to manually go through each section one by one? that way i dont have to test my luck running the entire script each time it fails. it got about half way through the kernel modeles this time before it failed, yet now it has to redo everything before that to try again. im trying to remove the luck factor a little bit so i dont spend the rest of my life trying to migrate this host.


apparently i just had to get pissed and give it a stern talking to, cause make buildkernel just completed. onwards.

i've successfully upgraded the physical machine that i downloaded and ran make buildworld on and it went without a hitch. i have high hopes for the rest of this migration.

thanks for the help guys, and a place to blog my thoughts.

Last edited by Diceman; 3rd August 2008 at 05:30 AM.
Reply With Quote
Reply

Tags
6.1, esx, make buildworld, segmentation fault, vmware

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FreeBSD as firewall/router on VMware ESXi Bruco FreeBSD General 12 6th December 2008 08:37 PM
FreeBSD 8.0-CURRENT (amd64 & i386) VMware Virtual Appliances Available glarkin_at_FreeBSD FreeBSD Installation and Upgrading 1 3rd December 2008 08:49 AM
import physical freeBSD into VMWARE (ESX) server as a vServer ccc FreeBSD General 6 3rd October 2008 07:04 AM
Need help with NTP + VMWare Yuka FreeBSD General 9 25th September 2008 11:59 PM
NIC-less FreeBSD and VMware Nirbo FreeBSD General 11 11th May 2008 05:34 AM


All times are GMT. The time now is 07:02 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content copyright © 2007-2010, the authors
Daemon image copyright ©1988, Marshall Kirk McKusick